TIA - Application decision - s62A (PA) - Approval_1

No. Conditions of Approval                                                  Condition Timing

2    Road Access Works comprising a minimum 6 meter wide Vehicle            Prior to the commencement
     Crossing – Heavy Duty must be provided at the permitted access         of the use of the Road
     location, generally in accordance with:                                Access Works and to be
         i.  Institute of Public Works Engineering Australia (IPWEA),       maintained at all times.
             Heavy Duty Property Access, dated 07/2023, Standard
             Drawing RSD-102, Rev A.
        ii.  Department Transport and Main Roads' Road Planning
             and Design Manual;
       iii.  Queensland Manual of Uniform Traffic Control Devices;
             and,
       iv.   Sight Distance Layout Plan, prepared by Bax Engineering,
             dated 3 Feb 2024, drawing number 460-001-900, revision
             B.
3    The permitted road access and driveway on the state-controlled         At all times.
     road must maintain clear sight lines, free from any potential
     obstacles, including but not limited to fencing, structure, signage,
     or vegetation, for all footpath users. This must be in accordance
     with Section 3.2.2 “Sight distance requirements at driveways” of
     the Guideline on Treatment Options to Improve Safety of
     Pedestrians, Bicycle Riders, and Other Path Users at Driveways,
     published by the Department of Transport and Main Roads in
     February 2021.
4    The existing Road Access Works situated between Cooroy                 Prior to completion of Road
     Connection Road and Lot 27C5605 must be removed and all kerb           Access Works for new
     and channel and concrete footpath reinstated between the               permitted road access
     pavement edge and the property boundary in accordance with the         location.
     surrounding environment.
5    Direct access is prohibited between Cooroy Connection Road and         At all times.
     Lot 27C5605 at any other location other than the Permitted Road
     Access Location described in Condition 1.


    Reasons for the decision
    The reasons for this decision are as follows:
           a) To ensure the road access locations do not compromise the safety and efficiency of the
              state-controlled road.
           b) To ensure that development does not create a safety hazard for users of a state-
              controlled road.

    Please refer to Attachment A for the findings on material questions of fact and the evidence or
    other material on which those findings were based.

    Information about the Decision required to be given under section 67(2) of TIA




                                                                                                 Page 2 of 13