Council archive · source document
Referral Agency Response - Minor Change - Planning RAP20 0037 01 · RAP20/0037.01
c. The driveway within the road reserve must be constructed of an approved
pavement type.
d. The works must not adversely impact on existing natural vegetation and trees.
e. The works must include any necessary reinstatement of disturbed vegetation
along the shoulders of the driveway.
f. All necessary stormwater drainage control measures must be provided so as not
to concentrate stormwater runoff or cause erosion on adjoining lands.
13. Pavement design for privately owned works within the road reserve must be undertaken
in accordance with the relevant standards and must be certified by an RPEQ.
14. All pavements within the road reserve must have a slip resistant surface.
Stormwater Drainage
15. The development works must not to cause additional ponding of water on any adjoining
lands or concentrate or direct overland flow to an adjoining property.
Erosion and Sediment Control
16. Sediment and erosion control measures must be in place prior to works commencing
and for the duration of construction *. The site Supervising Engineer is responsible for
ensuring that the sediment and erosion control measures have:
a. Been duly designed by an RPEQ or CPESC and constructed in accordance with
"best practise" methods,
b. Been revised by an RPEQ or CPESC to address the issues raised by changes in
the projected construction schedule and/or methods,
c. Been revised to address predicted rainfall events,
d. Achieve the desired environmental outcomes, and
e. Are maintained until site stabilisation has been established.
Council may request further controls to be installed should the implemented measures
be found inefficient.
17. The developer must ensure non-essential exposure of soil is prevented by restricting the
extent of disturbance and minimising the duration of soil exposure to adverse weather
conditions and effectively turf, cover or stabilise any disturbed area without delay and
prior to rainfall occurring.
18. Sediment must not leave the site or enter onto adjoining properties or Council’s drainage
system due to surface runoff or on tyres of vehicles and/or machinery. It is essential to
implement appropriate approved erosion and sediment control measures throughout the
site during all phases of construction including vehicle shakedown pad/grid (or similar)
at the access to the construction site. Where sediments or other contaminants are
deposited on a road, they must be removed so as not to enter Council’s drainage system
or waterways.
19. Prior to the completion of the development and commencement of use, all site surfaces
must be effectively stabilised using methods which have achieved effective short-term
stabilisation and which will continue to achieve effective stabilisation in the medium to
long-term. For the purpose of this condition, an effectively stabilised surface is defined
as one that does not, or is not likely to result in visible evidence of soil loss caused by
sheet, rill or gully erosion or lead to sedimentation, or lead to water contamination.
Damage to Services and Assets
20. Any damage caused to existing services and assets as a result of the development
works must be repaired at no cost to the asset owner at the following times:
Page 4 of 6
Document Set ID: 23371116
Version: 5, Version Date: 26/11/2024
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Referral Agency Response - Minor Change - Planning RAP20 0037 01.pdfRelated documentApplication case desk ↗
About this file
- File size
- 112 KB (small file)
- File type
No other editions are linked here.