Referral Agency Response - Minor Change - Planning RAP20 0037 01 · RAP20/0037.01

                        a.      Where the damage would cause a hazard to pedestrian or vehicle safety,
                                immediately; or
                        b.      Where otherwise, upon completion of the works associated with the development.
                        Any repair work which proposes to alter the alignment or level of existing services and
                        assets must first be referred to the relevant service authority for approval.
                        Additional Conditions – 20 November 2024
                        Earthworks
                 21.    All earthworks and associated retaining structures/batters must be contained entirely
                        within the subject site unless written permission from the respective landowner(s) is
                        provided to Council. All earthworks must be undertaken in accordance with the
                        provisions of Australian Standard AS3798: Guidelines on Earthworks for Commercial
                        and Residential Developments.
                 22.    Earthworks carried out on site must not affect the structural integrity of the revetment
                        wall, existing fences or other structures that border the subject site. Fences that are
                        affected must be replaced in a timely manner and in consultation and agreement of the
                        owners of the related properties.
                        Revetment Wall / Flood Storage
                 23.    All works must be carried out generally in accordance with the Noosa Cooloola Land
                        Surveys’ Proposed Earthworks Plan (21220) dated 10 October 2024.
                 24.    All works for the purpose of increasing available flood storage must be located within
                        the 4.5m setback from the revetment wall.
                 25.    Certification of the completed works within the 4.5m setback from the revetment wall
                        must be submitted to Council within 3 months of the completion of the works. The
                        certification must be prepared by a RPEQ (Registered Professional Engineer of
                        Queensland) and state that the works:
                        a. have not negatively impacted the stability of the revetment wall or negatively
                           impacted the associated membrane;
                        b. have not reduced the available flood storage within the lot from the profile as
                           described in The Noosa Plan 2020 – Low Density Residential Zone Code; and
                        c. meet the relevant conditions of this approval.
                 4.     REASONS FOR INCLUSION OF CONDITIONS

                 The proposal is subject to specific built form parameters outlined in The Noosa Plan 2020.
                 5.     ADVISORY NOTES

                 The following notes are included for guidance and information purposes only and do not form
                 part of the referral agency conditions:
                        Infrastructure Charges
                 1.     All developments and/or changes to existing developments may require payment of
                        “Infrastructure Charges” (as applicable) in accordance with Council’s “Charges
                        Resolution” made pursuant to the planning legislation and regulations current at the time
                        of issue.
                        Flood Compatibility
                 2.     It is recommended that the flooring materials and electrical works in flood liable areas
                        should take into consideration any potential for flood inundation eg by using flood
                        compatible materials and having electrical wiring and fixtures well above the estimated
                        flood level.




                                                                                                         Page 5 of 6
Document Set ID: 23371116
Version: 5, Version Date: 26/11/2024