Development Application Part 2 - Environmental & Stormwater Management Plans · OPW11/0335

                                                                                     [==_*iii^^7




SECTION 3 - FIELDWORK

3.1       Drilling and Sampling Methods

Fieldwork was undertaken on 14 May 2007 and comprised the drilling and sampling of six bores using a trailer-
mounted Hydrapower Trekker drilling rig operating solid flight augers. Strata identification and sampling was
from drill cuttings brought to the surface on the auger flights.


All soil samples collected from the bores were placed in plastic bags that were sealed after removing as much air
as possible and stored on ice prior to analysis.

3.2       Bore Locations and Supervision

Bore locations were determined in the field by direct measurement from existing site features and are indicated
approximately on the attached Drawing No. 1. The ground surface levels at the bore locations have been
interpolated from contours given on PMM's Combined Detail Survey Plan (Drawing No. 7328-03, dated 18 April
2007).


An experienced senior geotechnician set out the test locations, logged the stratigraphy encountered in the bores
and directed the in-situ sampling and testing program.




Residential Development                                                                               Page 4of10
215-219 David Low Way. Peregian Beach
Project No. 07160                                                                                    18 June 2007