08/0803 - MCU - Multiple Housing Type 2 - Duplex [As Published] · 132008.803

Column 1 Column 2 Column 3

Specific Outcomes Probable Solutions (if code assessable) Compliance

    

operated to support the efficient use of water, identified in Map 1 of Schedule 8, residential
uses that qualify as class 1A or 1B structures
under the Building Code of Australia have a

AND tainwater tank or tanks in accordance with
Schedule 8.
AND
O5 On-site water storage is adequate for $5.1 Where not in a water service area a
occupants every day use and fire fighting rainwater tank of a minimum of 60,000 litres is
purposes. provided for each dwelling unit, with the

exception of Multiple Housing Type 1.

 

Erosion and sediment control
O6 Development does not cause erosion or No solution provided. Conditions may be imposed if considered

result in transport of sediments off-site. Advisory Note appropriate.

Persons undertaking development, including
building work, are required under the
Environmental Protection (Water) Policy 1997
(EPP) to ensure that sediment and other
material including building waste, sawdust,
concrete, cement or paint are not deposited or
released into a roadside gutter, stormwater
drain or waterway, or into a place where it
could reasonably be expected to move or be
washed into a roadside gutter, stormwater
drain or waterway and are not washed from
the site. Council enforces the EPP and
penalties may apply.

[Amenity and Built form

 

 

 

 

 

Safety and security

O07 For Multiple Housing Types 2, 3 and 4, $7.1 The building entrance is clearly identifiable | Entrance to each unit is defined by a footpath.
buildings and outdoor spaces are designed to and visible from the street, footpath and

protect the personal security and safety of driveway;

residents by allowing for natural surveillance AND

$7.2 The internal path network has clear
sightlines to the dwelling entry and street access
points;

AND

$7.3 Visitors have direct access to the entrance