2017-12-12 P&E Agenda - Attachment 1 to Item 6 - Sign Proposal

Figure 1 – Subject Site




Proposed Signage

Our client proposes to erect a freestanding pylon sign on the site’s frontage to Walter Hay Drive. The
details of the proposed pylon sign and its proposed location is illustrated on the attached proposal
plans by Metro Signs and Powe Architects (refer Attachment 1).

As the plans show, the proposed pylon sign is intended to be a 5m high freestanding sign displaying
tenancy signage. In terms of scale, this sign contains approximately 8.3m2 of sign face area.

The accompanying site plan by Powe Architects identifies the proposed location of the proposed pylon
sign. In this regard, the plans shows that the sign fronts Walter Hay Drive and is set back
approximately 0.6m from the boundary. The verge widens at this location


Applicable Assessment Benchmarks

The 16 September 2013 version of the Noosa Plan specifies that an application for the placing of an
advertising device on premises, where not associated with a material change of use, that is triggered to
Code Assessment is to be assessed against the Advertising Devices Code. Accordingly, the following
sections address the relevant parts of this code.

Those particular provisions that are applicable and are considered material to this assessment are
discussed below.




                                                   2