Whsmp · OPW16/0021

                                                                  SWMS 36 – Install Manufactured Roof Trusses (General)
Safe Work Methods
                                                                                                                                                   Responsible       Residual
                                                                               H                      Controls / Work Methods
                                                                                                                                                   Person/s for        Risk
        Job Steps                     Potential Hazards       L     C   R      O           1. Eliminate 2. Substitute 3. Isolate 4. Engineer
                                                                                                                                                    Monitor &       L   C R
                                                                               C                           5. Admin 6. PPE
                                                                                                                                                     Review
                                                                                       Trusses shall not be loaded, including stood on, until
                                                                               4        temporary bracing is fixed in place in accordance with
                                                                                        structural drawings.
                                                                               4       The first truss should be erected straight and vertical
                                                                                        and temporary braced in position as per Appendix C of
                                                                                        AS 4440-2004 as appropriate. A copy of the standard
                                                                                        can be found on the intranet:
                                                                                          http://hbemp70/HutchIntranet/Default.aspx?classid=1
                                                                                          20
                                                                                       Each successive truss should then be spaced and fixed
                                                                                        back to the first truss with temporary ties to top and
                                                                                        bottom cord at a maximum spacing of 3000mm.
Accessing and working          Falls from height              B     5   E      4       A suitable means of access to areas at height is to be    Hutchinson        E    5       H
at height to install                                                    24              provided and used (e.g. appropriately placed / secured    Builders Site                  15
ancillary items (trimmers,                                                              ladder, stairs, EWP etc.                                  Foreman
nogging, framing                                                                       Workers are not to access any area(s) where edge
brackets and tie down)                                                         1        protection has not been erected or where any other fall   Workers
                                                                                        hazard may exist.
                                                                                       Under no circumstances are workers to climb on or
                                                                               1        otherwise position themselves where they are at risk of
                                                                                        falling onto and / or over protected edges.
                               Falling objects                C     4   E      4       Where there is a risk of objects falling onto workers /   Hutchinson        D    4       H
                                                                        18              persons below, a suitable means of restraining tools,     Builders Site                  14
                                                                                        equipment and any other materials is to be used (e.g.     Foreman
                                                                                        lanyards / wrist straps, toe boards (min 150mm high)
                                                                               3        etc.).                                                    Workers
                                                                               1       Exclusion zone(s) to be established below (where
                                                                                        relevant).
                                                                                       Tools, equipment and any other objects / materials are
                                                                                        not to be positioned where they could fall.




584 Milton Road TOOWONG QLD                               SWMS Developed by:       Jamie Gilbert                                                    VERSION 3 – September 2015
4066                                                      Position:                National Health & Safety Co-ordinator                                              Page 166
P: (07) 3335 5000 F: (07) 3335 5005
ABN: 52 009 778 330