Whsmp · OPW16/0021

                                                                                                      Erection of Pre-Cast Wall & Column Panels Checklist
                                                                                                                                                         HB-HSEQ-F-064
                                                                                                                                                             Version: 2




Qualifications / Competencies: Qualified engineer, experienced / trained workers, licensed dogman / rigger and crane operator
                                                                                                                           Signed By:
Item No.            TASK DESCRIPTION                                    ACCEPTED CRITERIA                              Checked          BUILDER   COMP/PERSON
                                                                                                                          √
    6       Bracing and securing of panels and         Braces to have ID plates fitted and to be good condition and
            columns;                                    installed in accordance with engineers brace detail.

               To the existing concrete floor         Manufacturer’s requirements complied to for securing drill
                slab                                    in type anchor bolts - Spec data sheet to be on site.

                                                       Ensure that existing floor slab has reached a minimum of 25
                                                        MPA.
               To be welded to previously             Welding of steel sections is to be carried out by a boiler
                installed panels and columns            maker or qualified welder.
    7       Environmental issue affecting safe        Not to lift in rain or rain affected ground areas that could
            pre-cast panel erection                    cause the crane or workers to slip or slide.
                                                      Not to lift in wind conditions that could cause the crane and
                                                       panel to become unstable.
    8       On Site Welding                           The qualified welder / boiler maker shall provide a sign off
                                                       procedure verifying that the welds carried out meets the
                                                       requirements of the engineers drawing and relevant GP AS
                                                       1554 .1 standard.

The following persons confirm that the above checklist has been implemented:

PROJECT:                 __________________________________________________________________________________________________

Foreman:                 _________________________         Signature:                ____________________________________ Date: ______________

Competent Person:        __________________________        Signature:                ____________________________________ Date: ______________

HSO:                     __________________________        Signature:                ____________________________________ Date: ______________




                                                                                                                                                              Page 3 of 3