Whsmp · OPW16/0021

                                                                                          Generic Initial Inspection Checklist
                                                                                                                             HB-HSEQ-F-033
                                                                                                                                 Version: 2




                                                      DAILY PRE-START INSPECTION
                                                                                                          Date :      /           /
                                            WALK AROUND INSPECTION
                                            √ tick if ok, x if attention req.
                                                                                                          HRS/KMS:
                                                                                                                     Initial By       Initial
                                                                                                            √-X      Operator           HB
1.    REGISTRATION – machine/equipment’s registration in date
2.    COMPLIANCE / ID PLATE – fitted to machine
3.    LOAD CHARTS – attached to equipment - clear, legible and in English
4.    SAFE WORKING LOADS – clearly marked
5.    ATTATCHMENTS – (if equipped) operate and are not damaged
6.    HARNESS ATTACHMENT POINTS – in good condition
7.    HYDRAULIC OIL – is full and free of leaks
8.    HYDRAULIC RAMS -
9.    LUBRICATION / GREASE -
10.   PINS/ BRUSHES & SEALS – appear to be in good condition
11.   PRESSURE GAUGE – attached and in working condition
12.   ROPS / ROLL BAR fitted
13.   FOOT BRAKES – work and function smoothly without grabbing. No fluid leaks.
14.   PARKING BRAKE- will hold the machine on an incline.
15.   CONTROL LEVERS – are labelled, not loose or binding & freely return to neutral.
16.   ENGINE OIL – is full and free of leaks.
17.   EXHAUST / ENGINE- guarded
18.   FIRE EXTINGUISHER – in place & in date.
19.   FIRST AID KIT – in cabin (where necessary)
20.   LIGHTS – (head, tail & warning) work & are aimed correctly.
21.   REVERSING BEEPER - working
22.   HORN – works.
23.   MIRRORS – all rear view mirrors are securely fixed to the machine and adjusted accordingly.
24.   BACKUP ALARM (if equipped) works.
25.   SEAT BELT – or restraint is accessible & in working condition & not damaged oily or dirty.
26.   STEERING – free and responsive no excessive play.
27.   WATER LEAKS/WATER LEVEL
28.   TYRE CONDITION - tyre pressure, and nuts tightened
29.   WHEEL RIMS – are maintained and in good working condition.
30.   WINDSCREEN – washers, wipers and windscreens attached and free of damage.
31.   LOAD LIMIT DEVICES AND SWITCHES – in working order