Skip to the record
Accept no imitations.

Council archive · source document

Tod Consulting Stormwater Plans v2 · 132003.221172.A

Attached to the e-mail Change to DA - 132003.221172.A.msg.

of 22

Check the original when the exact wording matters.

Plans and drawings: the text below has words only, no drawings.

Log in to see the plans as drawn
       The target stratum for the foundation of the structure at location BH1 is the SAND at a
       depth of 800mm below existing ground level.
       The target stratum for the foundation of the structure at location BH2 is the SAND at a
       depth of 1300mm below existing ground level.

       It is the designing engineers responsibility to address the potential influence of any trees
       present on or around the proposed building site.

       If any fill is placed over the existing ground, the structure shall be piered through the fill
       into the existing material. Further note that the placement of reactive material as fill, or cutting
       of the site may change the site’s classification.

4.     SOIL PROFILE

       Refer to Soil Profile Report for borelog information

       Whilst every effort has been made to ensure that the borelogs carried out at the subject
       allotment are indicative of the soil profile over the site any discrepancy between the profile
       detailed in the borelogs and that observed during construction shall be referred to Global
       Testing for immediate attention.


5.     MATERIALS LABORATORY TEST RESULTS

       Soil Laboratory testing was not carried out on samples of the soil taken from the site because the clay
       content of the material was too low for Shrink-Swell movements to be critical in the classification of
       the soil profile. Determination of the classification for the site in this situation is based upon results
       from Dynamic Cone Penetrometer testing performed over the site.

                         BOREHOLE                                                 n/a
                         DEPTH RANGE OF SAMPLE                                    n/a
                         LIQUID LIMIT                                             n/a
                         PLASTIC LIMIT                                            n/a
                         PLASTIC INDEX                                            n/a
                         LINEAR SHRINKAGE                                         n/a
                         INSTABILITY INDEX                                        n/a
                         SHRINK SWELL INDEX,Iss                                   n/a
                         PREDICTED SURFACE MOVEMENT                               n/a

      Please note that the Plasticity Index (PI) determined by the Atterberg Test may be correlated to an
      Instability Index (Ips)with reference to the results of extensive testing carried out by others, notably,
      Dr P Mitchell, ‘Footings for Small Scale Domestic Structures, ’March 1990.

     Yours Sincerely,




     MICHAEL PINKNEY. (Laboratory Manager)




                                                 15/1054 Page 2

Used in these records

About this file

File size
6.7 MB (large file)
File type
PDF

No other editions are linked here.

Original file

Log in to download the original file

Tod Consulting Stormwater Plans v2.pdf · 6.7 MB (large file)

The download may take up to a minute.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.