Council archive · source document
08/0774 - Decision Notice [As Published] · 142008.774
-2- 2008/774
Plan / Rev. Plan / Document Name Date
Document
No.
08/56-1 Elevation 1, Elevation 2, Framing April 2008
Layout & Site Plan – John Norden &
Associates
08/56-2 Typical Section, Detail 1, Detail 2 & April 2008
Detail 3 – John Norden &
Associates
and as may be amended by these conditions.
2. Structures should be designed and constructed such that they are free standing
within the waterway and are not connected to or behind the revetment wall.
3. Jetties should have a level-walking surface of R.L 1.000 A.H.D or be level with the top
of the revetment wall.
4. A rigid handrail shall be fitted on one side of the walkway.
5. No posts or vertical supports of the proposed jetty are to extend vertically from the
structure unless they provide support for the handrail.
6. No boatlifting devices are to be attached or moored at the jetty structure for the
purpose of elevating a vessel above the water without Council approval.
7. There shall be no electrical reticulation system carrying electricity in excess of 24
volts beyond the revetment wall.
8. Lighting associated with the use shall be designed, installed, operated, and
maintained in accordance with Section 3 of AS4282 Control of the Obtrusive Effects
of Outdoor Lighting.
9. Rock scour protection, wrapped in geotextile, extends 750 mm from the face of the
revetment wall in this locality. Piles are to be located clear of this rock protection.
10. The jetty is to be used for private purposes only with no commercial operations to be
undertaken.
11. Boat repair activities will not be permitted on site.
12. Wastewater and sullage shall only be disposed of at approved pumpout facilities.
13. The mooring facility shall not be utilised for live-aboard purposes.
14. Any construction and post construction activity is not to impact on the condition of the
waterway, and is to be conducted so as not to breach the Environmental Protection
Act EPA (1994) and the Environmental Protection (Water) Policy 1997.
15. The approval or conditions do not constitute a ruling on structural safety and the
applicant must make their own arrangement to ensure adequacy of design and work.
Also any approval granted does not warrant that such plans and specifications have
been checked in detail, nor does not warrant that such plans and specifications have
been checked in detail, nor does it absolve the owner of the land from complying with
all the conditions of this approval and/or relevant Council By-Laws and Policies and/or
relevant statues and/or statutory regulations in the execution and/or performance of
said works. The Council does not accept any responsibility for the accuracy of such
plans and specifications as approved.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
08/0774 - Decision Notice [As Published]Related documentApplication case desk ↗
About this file
- File size
- 55 KB (small file)
- File type
No other editions are linked here.