20210216 RECOR Further Advice Response

            30 November 2022

            Ref: MCU22/0084

            Ms J Lyons
            PO Box 141
            Tewantin, QLD 4565


            Attention:      Jayda Lyons

            Dear Ms Schramm,

                    Re:     Further Advice
                    At:     62 Gateway Drive Noosaville Qld 4566

            With reference to the abovementioned development application and the subsequent
            further advice from Council, we have prepared a response to the engineering matters
            raised as follows:

            Location of Driveway Taper to Lintel
               1. Provide additional detail demonstrating that the proposed driveway
                   crossover is located generally in accordance with Noosa Council’s
                   Standard Drawing RS-049. The additional detail must be prepared by a
                   suitably qualified person (RPEQ – Registered Professional Engineer of
                   Queensland).

            The proposed location of the heavy-duty crossover generally complies with Standard
            Drawings RS-051 and 63, except for the Type A wing width of 1m instead of 1.5m.
            Standard Drawing RS-049 details an exclusion zone of 1m from the lintel to the
            driveway’s wing.




            Figure 1 Extract from Standard Drawing DS-063




P +61 7 5211 1003         A 75 Noosa Dr, Noosa Heads Qld 4567   E [email protected]   recorconsulting.com