Council archive · source document
Minor Change Existing Approval MCU22 0087 01 & OPW22 0140 01 (As Published) · MCU22/0087.01
14. All deck and balcony areas must not be enclosed with shutters, louvres, glass panelling or
the like thus remaining as open structures.
15. All balustrades to decks and balcony areas must be open or transparent.
16. External colours and finishes must be of an understated colour scheme and low-reflective
roofing and cladding materials.
17. All air conditioning units or other mechanical equipment must be fully enclosed or screened
such that they are not visible from the street frontages nor adjoining properties.
18. Waste storage areas, clothes drying areas and external storage areas must be screened
from view of the street.
Fencing and Walls
19. Any street fencing must not exceed 1.8 metres in height, be set back an average of 1 metre
and articulated to provide visual interest by stepping the design. Any fencing on the front
boundary must either:
a. not exceed a maximum height of 1.2 metres
b. be of open construction.
20. The area of land between the fence and the front property boundary must be densely
landscaped to screen any fencing from the street.
Protection of Privacy
21. The roof terraces must include 1.7m fixed external screens in the location shown on the
approved plans, positioned in such a way to obscure direct views into the habitable room
windows or private open space areas of the adjoining property. The privacy screens are to
remain fixed open structures, with 50% opacity.
22. To ensure privacy is protected between adjoining properties, the windows located on the
north eastern and north western building faces must either:
a. have a minimum window sill height or 1.7 metres above floor level;
b. be fitted with translucent glazing; or
c. be fitted with a fixed external screen.
Waste Management
23. A waste storage area must be designed and maintained in accordance with Planning
Scheme Policy PSP9 Waste Management and the Noosa Plan’s Waste Management Code.
The waste storage area must be:
a. imperviously paved and correctly sized for all refuse and recycling containers;
b. bunded and graded so that wastewater and bin leakage drain to the sewer;
c. provided with a conveniently located hosecock and backflow prevention device,
connected to a water supply to service the area; and
d. roofed or otherwise covered.
Community Management Statement
24. Any proposed Community Management Statement required for the development pursuant to
the Body Corporate and Community Management Act 1997 must be submitted to Council for
endorsement at the same time as submission of the Building Format Plan (or similar) to
Council for compliance assessment.
25. All clauses and by-laws of the proposed Community Management Statement must accord
with the requirements of this Decision Notice.
Page 4 of 20
Document Set ID: 24309867
Version: 5, Version Date: 20/11/2025
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Minor Change Existing Approval MCU22 0087 01 & OPW22 0140 01 (As Published).pdfRelated documentApplication case desk ↗
Minor Change Existing Approval MCU22 0087 01 & OPW22 0140 01 (As Published).pdfRelated documentApplication case desk ↗
001 ECM_24309867_v5_Minor Change Existing Approval MCU22 0087 01 & OPW22 0140 01.pdfRelated documentApplication case desk ↗
001 ECM_24309867_v5_Minor Change Existing Approval MCU22 0087 01 & OPW22 0140 01.pdfRelated documentApplication case desk ↗
About this file
- File size
- 215 KB (small file)
- File type
No other editions are linked here.