24BRW0157 OWMP Final

2.5.         Refuse Storage Arrangements
All general waste and commingled recycling will be stored within 1100L bulk bins housed inside the refuse
enclosure which directly adjoins the workshop.
The refuse enclosure includes a bunded washdown area for the cleaning of bins. As outlined in Table 2.9, the
design of the bin washing amenity meets the criteria outlined in condition of approval 17.
The refuse enclosure is sufficiently sized to accommodate 1100L bins with lifting pockets to enable service by
front loading RCV providing flexibility in servicing strategy.
Waste oils will be stored within 200L drums on a bunded pallet within the workshop area or equivalent bunded
storage arrangement. Waste oils may be relocated within the workshop as operationally convenient through
the use of a forklift or pallet jack.
Figure 2.1 shows a potential layout configuration of the refuse enclosure and demonstrates an indicative
location for the holding of waste oils.




Figure 2.1: Potential Refuse Storage Area Layout
Source: Tyson Design Studio, Project: Noosa Bus Depot, 5-13 Production Street, Noosaville, Drawing: Floor Plan, Drawing Number:
1580-DA02, Rev: E – TTM Layout Markup




Site: 5 – 13 Production Street, Noosaville                                                                                    13
Reference: 24BRW0157