Council archive · source document
Decision Notice - Change to an Existing Approval - 010.2003.00221135.002 [As Published] · 132003.221135.2
2003/221135
Site Stability
41. A Geotechnical Engineer or similar qualified expert shall assess the soil condition on site,
determine the soil classification, establish whether any measures are required to protect the
stability of adjoining buildings and/or structures, and make recommendations on the type of
foundation system(s) best suited for the proposed development. This information shall be
submitted to the Council for assessment and approval prior to obtaining a Development Permit
for Operational Works.
Erosion and Sediment Control
42. Any person acting on this permit shall prevent erosion and sediment export from leaving the
site. Site control measures such as silt fencing, controlled gravel access to the site and
controlled disposal of waste, will be necessary.
In this regard plans detailing the methods of controlling erosion and sediment are required to
be submitted to the Council for approval prior to obtaining a Development Permit for
Operational Works.
General
43. Any damage caused to any public utility during the course of construction shall be repaired to
Council’s standards and at no cost to Council.
44. Any alteration of any public utility or other facilities necessitated by the development of the
land or associated construction works external to the site shall be at no cost to Council.
45. The transportation of all materials to and from the site shall be undertaken in a manner such
that no particle matter escapes onto a public road. All vehicles carrying materials either to or
from the site shall be covered to prevent materials including dust being windblown from the
vehicle.
46. A Registered Professional Engineer of Queensland shall certify engineering drawings and
specifications for all engineering works, which shall be submitted in conjunction with an
application for a Development Permit for Operational Works.
BUILDING SERVICES
47. A verification survey of the building is to be carried out by a Licensed Surveyor and a
certificate lodged with Council at completion of the work confirming compliance with the
maximum building height as shown on the approved plans.
48. The side boundary setbacks of all elements of the building are to comply with the same
setback provisions as are prescribed in Element 1, A2 of Part 12 of the Queensland
Development Code for single detached houses.
49. The plans submitted for a Development Permit for building works are to comply with the
approved plans and the following requirements:-
49.1 Any decks such as the pool deck, and the swimming pool itself, shall not be constructed
at a height exceeding 1 metre above natural ground level within 1.5 metres of the side
boundary or within 6 metres of the road boundary of the property.
ENVIRONMENTAL HEALTH
50. The developer must provide a suitably screened imperviously external paved area large
enough for all refuse and recycling containers.
51. Swimming pool or spa pumps are to be contained in an acoustically treated enclosure or
located in a manner which prevents a noise nuisance beyond the subject land in accordance
with the nuisance provisions of the Environmental Protection Regulation 1998. On the spot
fines apply for such offences.
Page 6 of 11
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Decision Notice - Change to an Existing Approval - 010.2003.00221135.002 [As Published]Related documentApplication case desk ↗
About this file
- File size
- 69 KB (small file)
- File type
No other editions are linked here.