2018-10-15 General Committee Meeting Notes

RECOMMENDATIONS ONLY – NOT THE FINAL DECISION OF COUNCIL
GENERAL COMMITTEE MEETING                                                   15 OCTOBER 2018


        ENGINEERING
              External Works
        17.   A 2.0m wide concrete footpath must be provided within the road verge for the
              entire length of the frontage of the site to Wattle Street. The path must generally
              match with the existing grassed verge without causing a trip hazard. The works
              must be undertaken in accordance with an Operational Works approval and must
              include/address the following:
              a.    Be in compliance with IPWEAQ standard drawing SEQ R-065 Concrete
                    Pathway Construction Details;
              b.    Be extended to smoothly tapered and join with the existing path along
                    Garnet Street.
              Reinstatement Works
        18.   Any redundant driveway and/or kerb layback must be removed, and the kerb line
              and verge area reinstated and landscaped to match the existing kerb and/or
              verge treatments. Grassed verge areas to be reinstated must be provided with
              100 mm topsoil and turf, and must be maintained by the developer until
              established.
        19.   The redundant private pathway connection within the grassed verge of Garnet
              Street must be removed, and verge area reinstated and landscaped to match the
              verge treatments.
        20.19.     Any badly damaged kerb and channel along the frontage of the site must
             be repaired to the reasonable satisfaction of Council’s representative.
              Site Access and Driveways
        21.20.      A sealed one way access driveway must be provided from Wattle Street to
             all parking and manoeuvring areas of the development with an exit only to Garnet
             St. The works must be undertaken in accordance with an Operational Works
             approval and must include in particular:
              a.    Driveway crossovers in accordance with IPWEAQ standard drawings R-
                    049 and R-050 to grades prevent vehicles from scraping and/or bottoming
                    whilst also allowing for compliant grades for the footpath and pedestrians
                    movements along the footpath and the grassed verge without any step or
                    trip hazard.
              Car Parking
        22.21.      Car parking must be provided within the site generally as shown on the
             approved plans. The works must be undertaken in accordance with an
             Operational Works approval and must be in compliance with the provisions of
             AS/NZS 2890.1-2004 with allowance for standard vehicle to enter and leave the
             site in a forward gear and with a minimum head clearance (headroom) at any
             point of 2.2m.
        23.22.     All car parking areas and access driveways must be maintained exclusively
             for vehicle parking and manoeuvring and kept in a tidy and safe condition at all
             times



                                                                                 Page 18 of 26