Skip to the record
Search everything, all in one place.

Original source · versioned page text

2018-10-15 General Committee Meeting Notes

of 26

Page text shows just the words. Original shows the document exactly as it was published.

Text sections have not been matched to the original PDF pages. Use the original document to check page numbers.

RECOMMENDATIONS ONLY – NOT THE FINAL DECISION OF COUNCIL
GENERAL COMMITTEE MEETING                                                 15 OCTOBER 2018


              Building Height
        5.    The maximum height of the development must not exceed 8 metres above the
              finished ground level and the natural ground surface except for the lift overruns
              and the centrally located skillion roof eaves which must not exceed the height
              indicated on the approved plans and not exceed 8.8m above the natural ground
              level.
        6.    The maximum height of the development must be 2 storeys. A 0.75m wide
              garden must be provided for the full length of the plant room wall near the
              driveway to a height of a maximum of 1m below the ground floor so as to not
              constitute a storey pursuant to The Noosa Plan. Amended plans must be
              submitted to Council prior to the issue of an operational works approval
              demonstrating compliance with the maximum height.
        7.    Certification must be submitted to Council from a Licensed Surveyor which
              certifies that the building does not exceed the maximum height requirements of
              this Decision Notice.
              Performance Bond
        8.    Security in the form of a cash bond or trading bank guarantee to the sum of
              $50,000 must be submitted to Council, to secure performance of all conditions of
              this approval, prior to the pre-start meeting. The cash bond or trading bank
              guarantee will be returned on performance of the conditions of approval less any
              costs incurred by Council in respect of enforcing performance of this permit.
              Council reserves the right to call upon the bond or guaranteed sum to effect
              compliance with conditions.
              Street Identification
        9.    The street address of the development must be clearly visible and discernible
              from the primary frontage of the site by the provision of a street number and,
              where appropriate, the building name.
              Building Appearance
        10.   External finishes must consist of a mix of materials in accordance with the
              approved plans. The parapet facing Goodchap Street must be articulated to
              break up its length and present a more domestic scale and appearance.
        11.   All air conditioning units or other mechanical equipment must be fully enclosed
              or screened such that they are not visible from the street frontages or adjoining
              properties.
              Protection of Privacy
        12.   To ensure privacy is protected between adjoining properties all windows and
              glass doors located on the upper level of the southern building face must either:
                   have a minimum window sill height or 1.5 metres above floor level
                   be fitted with translucent glazing
                   be fitted with a fixed external screen




                                                                                 Page 4 of 26
Log in to download the original file

2018-10-15 General Committee Meeting Notes(PDF, 786KB).pdf · 805 KB (small file)

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.