Original source · versioned page text
2017-06-06 - P&E Agenda Attachment 1 to Item 6 Draft Alignment Amendments Part 1 (Pages 1-907)
Very large file: it may take a few minutes
The original of this document is very large (18.9 MB). Opening the original or downloading it may take a few minutes. Please be patient and don't click again. The page text is quick to read. If you are on mobile data, it is best to wait until you are on Wi-Fi.
column 1 column 2
Including amendments 3 July 2017
Specific Outcomes Probable solutions
The Noosa Plan
Site cover, gross floor area and plot ratio
O9 The site cover, gross floor area and plot
No solution provided
ratio of buildings and other roofed structures—
a) results in a building scale that is compatible
with surrounding development;
b) does not present an appearance of bulk to
adjacent properties, roads or other areas in
the vicinity of the site;
c) maximises the retention of existing
vegetation and allows for soft landscaping
between buildings;
d) allows for adequate area at ground level for
outdoor recreation, entertainment, clothes
drying and other site facilities; and
e) facilitates onsite stormwater management
and vehicular access.
O10 Site cover does not exceed—
a) for a class 1 or class 10a building within the
Detached Housing Zone, —
i for a single storey building - 50%; or
ii for a building of 2 or more storeys -
50% on the ground floor and 30% for
the upper storey(s), or 40% for all
storeys for a building of 2 or more
storeys;
b) for other classes within the Detached
Housing Zone - 40%;
c) for the Semi-Attached Housing Zone—40%;
or
d) for the Attached Housing Zone—40%
e) for the Community Services Zone—50%
O11 For Multiple Housing Type 2 buildings
have a maximum plot ratio of 0.45:1.
O12 For Multiple housing Type 3 or 4, Visitor
accommodation Type 4, or the accommodation
unit component of an Entertainment and dining
business Type 3—maximum gross floor area is
equivalent to the maximum allowable population
2
in persons multiplied by 40m .
O13 For the Business Centre Zone plot ratio
does not exceed—
a) 0.8:1 for site areas up to and including
2
2,000m ; and
2
b) 0.3:1 for the balance of a site over 2,000m .
6-46
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Very large file: the download may take a few minutes. If you are on mobile data, it is best to wait until you are on Wi-Fi.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.