Swmp

 STORMWATER QUALITY
The following sections discuss the stormwater quality considerations for the construction and operational phase of
the development.


     4.1. Construction Phase

          4.1.1 Erosion and Sediment Control Measures
During construction, it is necessary to manage stormwater run-off to avoid potential contamination and impacts to
the downstream environment from sediments and other pollutants from the site during construction. A range of best
practice sediment and erosion controls should be implemented on the development to ensure negative impacts to
the downstream receiving environment are mitigated.

As the area being developed is below 2,500m², the development’s construction will be managed using best practice
erosion and sediment control principles in line with the desired outcomes of Appendix 2 of the SPP (DERM, July
2017), which are shown below in Figure 4.1.




                     Figure 4.1 SPP 2017 Construction Phase Stormwater Management Design Objectives

A site-specific erosion and sediment control plan has been prepared demonstrating suitable erosion and sediment
controls suitable for the nature and scale of the development, including:

     1. Sediment fencing along downstream of the work areas within the site to prevent sediment from leaving the
        construction area.




Project number 20230023                                                                                 Page 9 of 14
File 20230023 206 David Low Way SWMP.docx, 2023-10-17 Revision 1

P +61 7 5211 1003                A 75 Noosa Drive, Noosa Heads, Qld 4567   E [email protected]    recorconsulting.com