Council archive · source document
Development Application part 2 of 2 plans - MCU13/0080
Plans and drawings: the text below has words only, no drawings.
Very large file (51.3 MB): may take a few minutes to open.
I’-
3’Jvlay2013
18Sunseekgr Crose
the certifier
...
sunlight; and or Proposal complies
g) designed to provide for the c) if small dwelling units within
privacy of occupants of the the Business Centre Zone, a
premises and adjoining balcony not less than 1.5m
premises. depth and with a minimum area
of 4m2;
AND
S10.2 For Multiple housing
Types 2 and 4, the
private open space area at
ground level is enclosed by side
and rear fencing, screening or
dense landscaping and the
landscaping can attain the
equivalent of 60% of the height
of the building on maturity to
protect the privacy of residents;
OR
S10.3 For Visitor
accommodation no solution
Provided
Communal Open Space
011 Communal open space No solution provided There are no recreational
within the development provides communal open spaces
adequate area for children to
provided for onsite.
play and for socialising, and
preferably has a northern
The shared areas are restricted
aspect.
to the driveway and landscape
area on the frontage of the
property.
Screening and Mounding
012 Planting is provided No solution provided 012 -
Adequate screening in
between units, adjacent to the form of landscaping and
service and car parking areas
fencing has been provided
and around the boundary of the
site to provide for adequate along the front boundary.
screening. (see Figure 14-20).
013 Clothes drying areas and 013 Sufficient room is
waste disposal areas are available in each units private
screened from adjoining
open space area to
properties and road frontages. accommodate clothes drying
014 Mounding adjacent to units
and bin areas. Relevant
do not extend into service
conditions of approval can be
corridors, cover utility covers,
obstruct overland stormwater included in the development
flow, or cause ponding on permit.
footpaths, verges or on
adjoining private property. 014 Relevant conditions of
015 Mounding associated with
noise barriers is designed to approval can be included in the
avoid linear shapes and development permit.
incorporates undulating shapes
33
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Development Application part 2 of 2 plans - MCU13/0080Related documentApplication case desk ↗
About this file
- File size
- 51.3 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.