Original source · versioned page text
Attachment 13 - Code Assessment
Noosa Plan 2006 Planning Scheme Code Assessment
Division 16 - Specific Outcomes for the Cooroy & Lake Macdonald Locality
Specific Outcomes Probable Solutions Comment
i for a single storey building - 50%; or
ii for a building of 2 or more storeys - 50% on the ground
floor and 30% for the upper storey(s), or 40% for all
storeys for a building of 2 or more storeys;
b) for other classes within the Detached Housing Zone -
40%;
c) for the Semi-Attached Housing Zone—40%; or
d) for the Attached Housing Zone—40%
e) for the Community Services Zone—50%
O11 For Multiple Housing Type 2 buildings have a
maximum plot ratio of 0.45:1.
O12 For Multiple housing Type 3 or 4, Visitor
accommodation Type 4, or the accommodation unit
component of an Entertainment and dining business Type
3—maximum gross floor area is equivalent to the
maximum allowable population in persons multiplied by
40m2.
O13 For the Business Centre Zone plot ratio does not
exceed—
a) 0.8:1 for site areas up to and including 2,000m2;
and
b) 0.3:1 for the balance of a site over 2,000m2.
Flooding and drainage
O14 Buildings and other works are designed and sited to— S14.1 For new buildings or structures or additions of more Complies. The site is not constrained by mapped flooding.
a) provide flood free access to premises and flood than 50m2 gross floor area to an existing building or As detailed in the Engineering Services Report prepared by
free habitable areas; structure, floor levels for habitable rooms are— Westera Partners and included at Attachment 8, the
b) allow only minor, short term and infrequent a) for areas where minimum floor levels are proposed development will achieve compliance with floor
flooding of non-habitable areas; available—not less than the specified level; levels for habitable rooms.
c) ensure carparking areas can be adequately b) for areas where flood modelling is available—a
drained; minimum of 300mm above the modelled flood
d) ensure drainage does not adversely impact upon level; and
other premises; and c) for areas where flood modelling is not available,
e) ensure filling or excavation does not adversely a minimum of 300mm above the highest known
impact upon other premises by— flood level;
Page 4 of 26
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalSearchable page text hides email addresses. Original files are unchanged and may show email addresses.