Council archive · source document
Geo-environmental Investigation · MCU25/0020
Very large file (12.4 MB): the original may take a few minutes to open or download. The page text below is quick to read.
Table 6: Water Quality Release Criteria
Indicator Release Limit
pH 6.5 to 8.5
Total Suspended Solids < 50 mg/L
Dissolved Aluminium < 0.3 mg/L
Dissolved Iron < 0.2 mg/L
No visible litter, sheen or odour washed from the
Litter/Gross Pollutants site or deposited in waters downstream of any
discharge
Groundwater extracted during construction would be expected to require quality adjustment prior to off-
site release to stormwater. At a minimum, this is expected to involve buffering (increasing) of the pH to
within the range 6.5 to 8.5 by the addition of a suitable agent, followed by the addition of a flocculant,
and sufficient settling/contact times to reduce turbidity and metal loads. Effective treatment of
groundwater to achieve suitable release criteria requires reasonable spatial and temporal consideration.
An experienced dewatering sub-contractor should be consulted to ensure appropriate outcomes can be
achieved.
8. Limitations
Your attention is drawn to the document Limitations, which is included in Appendix C of this report. The
statements presented in this document are intended to advise you of what your realistic expectations of
this report should be, and to present you with recommendations on how to minimise the risks associated
with the services provided by Tectonic for this project.
Geo-environmental Investigation Proposed Residence
11 March 2025 | 25040-001-Rev0 22
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Geo-environmental Investigation.pdfRelated documentApplication case desk ↗
About this file
- File size
- 12.4 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.