Minor Change Existing Approval - MCU19 0049 01 (As Published) · MCU19/0049.01

                      Advertising devices
               25.    Proposed signage for the premises is to be in accordance with Council’s signage policy.
                      Ambulance Bay
               26.    The existing ambulance bay roof (Porte Cochere) must be upgraded to ensure that
                      ambulances can be accommodated within the structure and allow for drive-through for an
                      urban ambulance vehicle (eg Mercedes Benz Sprinter 519 Bariantric-Specialist) and provide
                      a minimum headroom of 3.2m. This upgrading work must be completed and certified prior to
                      the commencement of use of the new buildings.
                      Retaining walls and Fall Protection
               27.    To preserve amenity and the heritage character to Maple Street, the retaining wall associated
                      with the proposed south parking area and its access ramp, shown on Elevation Plan (East)
                      DA030 Rev E, dated 19/09/2019 (as annotated by Council), should only be as high as it
                      needs to be for structural and/or earthworks retaining purposes and not be extended above
                      the finish ground level. Any required fall protection and/or fences above the retaining
                      structure is to be a picket or wooden rails fence style and its details must be included in the
                      application for Operational works for landscaping.
                      Frontage Works – Hospital Lane
               28.    Hospital Lane must be provided with two passing bays. The works must be undertaken in
                      accordance with an Operational Works approval and must include in particular:
                      a.      Road widening to provide vehicle passing bays minimum length of 12.0m and an
                              overall minimum width of 6.0m;
                      b.      The passing bays must include a minimum 10.0m long tapers at both ends of the
                              passing bays to provide transition between the new 6.0m wide bitumen seal and
                              existing width of lane’s bitumen, about 3.0m;
                      c.      The new road widening works must include kerb and channel consistent and tying with
                              the existing;
                      d.      The road widening works should have a minimum clearance of 600mm from the face
                              of kerb line to the new property boundary line;
                      e.      Suitable linemarking and signage to prohibit parking along the passing bays;
                      f.      Passing lanes may be located near or to include the proposed driveway crossovers to
                              the property.
                      Condition 28 is imposed pursuant to s665 of the Planning Act 2016 being non-trunk
                      infrastructure.
               29.    Any existing redundant driveway must be removed and the grassed verge be reinstated or
                      landscaped to match proposed finish surfaces.
               30.    Any damaged kerb and channel along the frontage of the property must be replaced to the
                      reasonable satisfaction of Council.




                                                                                                       Page 5 of 16
Document Set ID: 24873125
Version: 4, Version Date: 18/06/2026