Appendix D - Code Assessment · RAL19/0011

Site cover & gross floor area & plot ratio          No solution provided.                      Not applicable
O7 The site cover, gross floor area and plot
ratio of buildings and other roofed structures—
a) results in a building scale that is compatible                                              The proposed development is for a boundary realignment only.
with surrounding development;
b) does not present an appearance of bulk to
adjacent properties, roads or other areas in the
vicinity of the site;
c) maximises the retention of existing
vegetation and allows for soft landscaping
between buildings;
d) allows for adequate area at ground level for
outdoor recreation, entertainment, clothes
drying and other site facilities; and
e) facilitates onsite stormwater management
and vehicular access.

O8 Site cover does not exceed—
a) for a class 1 or class 10a structure within
the Detached Housing Zone, —
i for a single storey building - 50%; or
ii for a building of 2 or more storeys - 50% on
the ground floor and 30% for the upper
storey(s), or 40% for all storeys for a building
of 2 or more storeys;
b) for other classes within the Detached House
Zone - 40%; or
c) for the Semi-Attached Housing Zone–40%.

O9 For Multiple housing Type 2 buildings
have a maximum plot ratio of 0.45:1.

O10 For Multiple housing Type 3, Visitor
accommodation         Type   4    and    the
accommodation      unit  component   of   an
Entertainment and dining business Type
3—the maximum gross floor area is equivalent
to the maximum allowable population in
persons multiplied by 40m2.

O11 For the Village Mix Zone, plot ratio does
not exceed 1.0:1.



Flooding and drainage                               S12.1 For new buildings or structures or   Not applicable