Council archive · source document
08/1704 - Operational Works - Prescribed Tidal Works - Transport Type 5 - Domestic Marine (Not Properly Made) [As Published] · 142008.1704
Figure 3 JETTY PONTOON 1.114 The maximum area of "Y" & “T” shaped jetty heads shall be 10.5m? excluding any walkway. A walkway with a minimum length of 3m shall be provided to these types of jetty heads (see Figure 4). Figure 4 1.12 The use of timber materials is preferred. Gangways and Walkways Serving Jetties and Pontoons 1.13 All gangways and walkways shall have at least one rigid handrail fitted and shall comply with the following— a) For detached houses, shall have a minimum width of 750mm; or b) For other residential uses— i) The gangway for single berth pontoons shall have a minimum width of 900mm; ii) The gangway for multiple berth pontoons shall have a minimum width of 1.2m if fitted with one handrail and 900mm if fitted with a handrail on each side; and iii) The primary walkway to multiple berth pontoons shall have a width of 1.5m. 1.14 The maximum width of gangway or walkway shall be 1.5m. 3 PSP04 Domestic Marine Uses outside Noosa Waters Estate Planning Scheme Policy commenced 3 February 2006
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
08/1704 - Operational Works - Prescribed Tidal Works - Transport Type 5 - Domestic Marine (Not Properly Made) [As Published]Related documentApplication case desk ↗
About this file
- File size
- 3.6 MB (large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take up to a minute.