Lighting Report

Conclusion
This report should be read in conjunction with the following drawings and data sheets:
HAS0001-E01 Lighting Plan
Luminaire Data Sheets D1, D2, D2A, P1, P1A and W1

The above designs and data sheets can be used as examples for generic specification for selection of luminaires and
lighting layouts. They can be substituted for other fittings and layouts given all the above mitigation measures are included
and performance of luminaires are simular. This should be evaluated on a case by case basis upon tender offer.

We have supplied lighting plans and luminaire selection to meet all requirements laid out above. All general exterior
lighting requirements have been met while minimising spill light below AS4282 requirements for both pre and post
curfewed hours.

A limit has been set for the total brightness emitted from illuminated signage in compliance with Noosa Council
requirements. A clear understanding of the benefits of illuminated signage has been laid out and a demonstration on
adverse effect have shown that none exist due to surrounding zoning and distance to residential properties.

We are happy that all potential adverse effects on rural amenity have been mitigated while still achieving required lighting
levels to compliment this development.

This report has been produced for inclusion in a wider RFI response.




Trent Dutton
Principal Lighting Engineer MIES




                                                                                                                                rubidium
                                                                                                                                light




                                                                           8