2018-11-06 Planning & Environment Committee Agenda

PLANNING & ENVIRONMENT COMMITTEE MEETING AGENDA                                6 NOVEMBER 2018


          For the purpose of certifying outdoor lighting devices for the development, a qualified
          person is:
          a.      Registered Professional Engineer of Queensland;
          b.      an environmental or electrical design consultant with a minimum of 3 years
                  current experience in the field of outdoor lighting.
    Building Demolition/Removal/Relocation
    38.   Where the development involves the removal, relocation or demolition of a building, a
          Waste Management Plan (construction and demolition) in accordance with Planning
          Scheme Policy 11, Waste Management Plans must be submitted and approved by
          Council’s Environmental Health Officer prior to issue of a development permit for
          operational works for demolition, removal or relocation of any building other than a
          shed.
          The purpose of the Waste Management Plan is to facilitate the segregation of waste
          for the effective reuse and recycling of such materials. Segregated wastes attract
          significantly reduced disposal fees at the landfill with some items free. Higher gate
          fees are charged for mixed waste.
          Waste storage areas must provide adequate separation of all reusable, recyclable
          and waste materials. These must be located so that they are convenient and safe to
          use.
          The Plan must contain the following information:
          a.      The site area for the storage and separation of waste is to be shown on the
                  plan drawings accompanying the application.
          b.      A waste management table as indicated below is to be completed showing how
                  waste material is to be segregated - recycled – reused or disposed.
          c.      Table – Waste Management Table
               MATERIALS ON-SITE                               DESTINATION
                                                   Re-use and Recycling               Disposal
     Expected waste            Estimated         On-site            Off-site           *specify
     materials                 volume(m³)   *specify proposed      *specify        contractor and
                                             re-use or on-site  contractor and      landfill site or
                                            recycling methods   recycling outlet   other disposal
                                                                                         site
     Excavation material
     Green waste
     Bricks
     Concrete
     Timber-please specify
     Plasterboard
     Metals - please specify
     Asbestos
     Other - please specify
    Note * If a demolition contractor is undertaking works, then the Waste Management table is
    to be completed by the demolition contractor.
    WASTE
    39.   The developer must provide waste storage and disposal facilities in accordance with
          Planning Scheme Policy No. 9 "Waste Management Multi-Dwellings and Commercial
          and Industrial Premises". The facilities must include an external impervious area
          correctly sized for all refuse and recycling containers and suitably screened from
          public places and neighbouring properties. A bin wash area is required with a cold-
          water tap, hose and drain outlet connected to sewer, via a bucket trap. The drain

                                                                                     Page 45 of 84