2018-10-09 Planning & Environment Committee Agenda

PLANNING & ENVIRONMENT COMMITTEE MEETING AGENDA                               9 OCTOBER 2018


          The Plan must contain the following information:
                The site area for the storage and separation of waste is to be shown on the
                plan drawings accompanying the application
                A waste management table as indicated below is to be completed showing how
                waste material is to be segregated - recycled – reused or disposed.
                Table – Waste Management Table
           MATERIALS ON-SITE                                 DESTINATION
                                                 Re-use and Recycling               Disposal
           Expected         Estimated    On-site            Off-site            *specify contractor
           waste            volume(m³)   *specify proposed  *specify            and landfill site or
           materials                     re-use or on-site  contractor and      other disposal site
                                         recycling methods recycling outlet
           Excavation
           material
           Green waste
           Bricks
           Concrete
           Timber-please
           specify
           Plasterboard
           Metals -
           please specify
           Asbestos
           Other - please
           specify
          Note * If a demolition contractor is undertaking works, then the Waste Management
          table is to be completed by the demolition contractor.
          Waste Storage & Disposal
    21.   The developer must provide waste storage and disposal facilities in accordance with
          Planning Scheme Policy 9, Waste Management, including an external imperviously
          paved area correctly sized for all refuse and recycling containers and suitably
          screened from public places and neighbouring properties.
    22.   Waste collection services are limited to between 6.30am and 6.30pm Monday to
          Saturday and not permitted on Sunday or public holidays.
          Outdoor Lighting Devices
    23.   Lighting associated with the use must be designed, sited, installed and tested to
          comply with Table 2.1 & 2.2 of Australian Standard AS4282-1997 “Control of the
          obtrusive effects of outdoor lighting” using a control level of 1.
    24.   Certification must be submitted to Council from a qualified person which certifies that
          all outdoor lighting devices comply with the requirements of this Decision Notice at
          the time of commissioning.
          For the purpose of certifying outdoor lighting devices for the development, a qualified
          person is:
                a Registered Professional Engineer of Queensland;
                an environmental or electrical design consultant with a minimum of 3 years
                current experience in the field of outdoor lighting.




                                                                                   Page 23 of 52