Response to Information Request

Information Required

      7. Provide a preliminary design of the proposed new road formation. The
         design must include but not be limited to:
         (a) a the typical cross section including any footpaths
         (b) a longitudinal section of the centerline
         (c) existing surface levels and design levels

Response:

In response to Item 7 of Council’s Information Request, please refer to plans
1702-01B and plans 1702-04A to 1702-06A prepared by Haynes Consulting
Engineers attached in Appendix C.         The attached plans demonstrate the
preliminary road design. Haynes Consulting Engineers have advised that to
provide a suitable house site on the lower lots, minor fill will be placed generally
as shown with 1:6 batter to natural surface. Overall the slope is away from the
road as per existing ground levels and roofwater pits will be placed at the low side
of lots.

3.0      Summary

We trust the additional information provided in this response will allow Council to
issue a successful development approval in due course. If you have any questions
or wish to clarify any matter outlined within this response, please don’t hesitate
to contact me on (07) 5441 2188.

Yours faithfully,




Blake Bell BRTP, M.P.I.A., MDIA
Director/Principal Town Planner
MURRAY & ASSOCIATES (QLD) PTY LTD