Council archive · source document
Sealed Judgement Neate 1219 of 2020 · MCU18/0015
Very large file (94.9 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
"Annexure A"
CONDITIONS OF APPROVAL – RECONFIGURING A LOT
When Conditions Must Be Complied With
1. Unless otherwise stated, all works required by the conditions of this Approval must be
completed prior to submission of the subdivision plan to Council for compliance assessment.
Currency Period
2. This development approval lapses if an application for plan seal is not lodged with Council
within four years after this approval starts to have effect, unless an application to extend the
currency period is approved by Council.
Approved Plans
3. Development authorised by this approval must be undertaken generally in accordance with
the Approved Plans listed in the table below.
Plan No. Rev. Plan/Document Name Date
165-DA-010 G Lot Reconfiguration Plan 5 June 2025
- - Impact to Trees on Site (v3.0) – Figures 1, 26 June 2025
1a, 1b and 1c
- - Koala Tree Planting (v3.0) – Figures 2a, 2b 26 June 2025
and 2c
- - Report of Dr Trevor Johnson (as varied by 11 August 2023
conditions 52 to 54 of the Material Change of
Use approval)
4. All lot numbering on the subdivision plan to be submitted to Council for compliance
assessment must remain as shown on the Approved Plans.
Building Envelope
5. All future dwellings on the approved lots must be sited and constructed in accordance with
the approved building envelopes and dwelling controls for each dwelling (BLE Footprint)
shown on the Approved Plans, being Impact to Trees on Site (v3.0) and Koala Tree Planting
(v3.0), both dated 26 June 2025.
6. The applicant must prepare a metes and bounds building envelopes plan indicating the BLE
Footprint for each of the proposed dwellings (BLE Footprint Plan). The areas must be in
accordance with the Approved Plans, being Impact to Trees on Site (v3.0) and Koala Tree
Planting (v3.0), both dated 26 June 2025. The BLE Footprint Plans must be submitted to
Council in both hardcopy and digital format (dwg) on GDA 94 zone 56 coordinates. The
applicant must submit the plans to Council for approval prior to the endorsement of the Plan
of Survey.
7. A copy of the approved BLE Footprint Plans for each dwelling must be included in the
contract of sale for the approved lots and/or dwellings, together with a clause which requires
the future dwellings to be constructed and maintained in accordance with the approved BLE
Footprint for each dwelling.
Boundary Encroachments
8. Certification must be submitted to Council from a Registered Cadastral Surveyor (Qld) which
certifies that:
a. all dwellings comply with the BLE Footprint for the dwelling shown on the approved
BLE Footprint Plans;
1
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Sealed Judgement Neate 1219 of 2020.pdfRelated documentApplication case desk ↗
About this file
- File size
- 94.9 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.