Lanscaping Specification URB-P0003847-000-SP-240719

 Sealer – Penetration, non-yellowing protective sealer for concrete floors. CCS Streetscape or approved
 equivalent.
 Sub-base depth / material – As per structural engineer’s documentation. Remove any soft areas that could
 lead to settlement and cracking and replace with suitable compacted material capable of supporting the base
 material
 Reinforcing – F72 mesh, min. 50 mm top cover as per structural engineer’s documentation
 Expansion joints - 10mm thick bitumen impregnated fibreboard. Locate expansion joints at 5m intervals unless
 shown otherwise on the drawings

 Control joints - Tooled control joints at 3m intervals unless shown otherwise on the drawings


 PA04: Pavement Profile – Exposed Aggregate Coloured Concrete – On Grade
 Material – In-situ concrete. 125mm thickness. Normal class. Minimum grade N32.
 Supplier – Boral or approved equivalent.
 Colour – Full depth colour "CCS Black 44"
 Aggregate - 'Night Sky'
 Surface Finish – Exposed aggregates, Light depth exposure
 Slip rating – Wet Pendulum Class rating ‘P4’ and slip resistant R11. All areas steeper than 1:14 to be Wet
 Pendulum Class rating ‘P5’ and slip resistant R12D.
 Sealer – Penetration, non-yellowing protective sealer for concrete floors. CCS Streetscape or approved
 equivalent.
 Sub-base depth / material – As per structural engineer’s documentation. Remove any soft areas that could
 lead to settlement and cracking and replace with suitable compacted material capable of supporting the base
 material
 Reinforcing – F72 mesh, min. 50 mm top cover as per structural engineer’s documentation
 Expansion joints - 10mm thick bitumen impregnated fibreboard. Locate expansion joints at 5m intervals unless
 shown otherwise on the drawings
 Control joints - Tooled control joints at 3m intervals unless shown otherwise on the drawings




 PA05: Pavement Profile – Exposed Aggregate Grey Concrete – On Grade

 Material – In-situ concrete. 175mm thickness. Normal class. Minimum grade N32.
 Supplier – Boral or approved equivalent.
 Colour – no
 Aggregate – ‘Eclypse'
 Surface Finish – Exposed aggregates, Mid depth exposure




URBIS
URB-P0003847-000-SP.DOCX                                                                              PAGE   16