Waste Management Plan

2.5.        RCV Arrangements and Bin Servicing Areas
RCV’s will enter the site from the loading dock driveway crossover provided on Level 1 off Serenity Close,
perform a single reversing manoeuvring on site into the loading bays on basement level and exit the site
once the collection has been performed.
All refuse will be collected directly from the refuse room adjacent to the loading bays. Once the bins have
been serviced, they will be returned to the bin room for use.
The type of vehicles allocated, and demand will be subject to final design and potential selection of volume
reduction equipment. The collection days and frequency form a part of the contract between building
management and the preferred contractor and is agreed to based on both the building and contractors’
business requirements. Figure 2.4 below shows the swept paths for an LRV, RCV’s this size and smaller are
readily available across the waste collection industry.
As the development is currently at the assessment process no contract has been entered into. Any
contractor letter request from Council should be conditioned to be provided prior to the commencement of
operation at the construction finalisation stage.
Further details on vehicle access and on-site manoeuvring can be found in the traffic report, with swept
paths provided in Appendix A.




Site: 3-7 Serenity Close, Noosa Heads                                                                         21
Reference: 22BRW0104