2014-04-28 General Committee Meeting Agenda Pages 1-64

GENERAL COMMITTEE MEETING AGENDA   28 APRIL 2014




                                   Page 44 of 200

GENERAL COMMITTEE MEETING AGENDA                                                         28 APRIL 2014

   Environmental Health
   25.   The developer must provide wasie storage and disposal facilities in accordance with Planning
         Scheme Policy No 9 “Waste Management Multi-Dwellings and Commercial and Industrial
         Premises”, including an external imperviously paved area correctly sized for all refuse and recycling
         containers and suitably screened from public places and neighbouring properties.      A roofed
         waste/bin wash area is required with a cold-water tap, hose and drain outlet connected to sewer, or
         approved wastewater disposal system via a bucket trap and grease arrestor,
   26.   The development must allow refuse-loading areas to be located off street. All vehicles associated
         with the collection of waste/recyclables, shall enter and leave the site in a forward direction, without
         the need for any unsafe maneuvering.
   27.   A Waste Management Plan (Operational) in accordance with Planning Scheme Policy No. 9
         “Waste Management Multi-Dwellings and Commercial and Industrial Premises", must be submitted
         for the day-to-day operation of the development and approved by Council's Health Section prior to
         issue of development permit for operational works.            .
         It is critical that waste areas are properly planned. A copy of Planning Scheme Policy No. 9
         explaining exactly how to predict waste quantities and design waste areas is available from Council
         and the web. The Plan shail include the following information: -
         °        The types of waste that will be generated from the activities approved within the
                  development,
         °        Estimated volumes or tonnage of both recyclables and waste generated.
         .        Methods to be used for dealing with garden waste.
         °        Initiatives to minimize waste either by waste prevention, reduction, re-use or recycling.
         .        Description of procedures for getting all waste to the bins; the storage of bins and the
                  collection of bins by the contractor.
         °        A description of the design details of waste storage and recycling areas including size,
                  focation, elevation and floor plan, methods of bin washing and system to prevent storm
                  water getting into sewer via the bin wash.
         °        A description of types and volume of waste storage containers to be used.
         .        The waste and recycling storage area shall include the provision of containers for all
                  waste and recycling materials including putresable matter, non-recycling waste, paper/
                | Cardboard, glass, aluminum/steel cans, waste oil, styrofoam boxes, etc, and bin washing
                  facilities connected to sewer.
          .       A detailed description of vehicular access to collect waste. Where collection is off street,
                   access must allow vehicles to enter and leave the site in a forward direction.
    28.  As no Plumbing Final has been issued through Noosa Council Plumbing Services, all existing
       _ plumbing and drainage, along with Backflow Prevention Devices, are to be assessed to ensure
         compliance with current Legislation and Acts.

    The approved plans and / or documents for this development approval are listed in the Assessment
    Manager conditions.
    5    ADVISORYNOTES                                                 i
    The following Advisory Notes are for information purposes only and do not form conditions of approval:

—                                                                                        6 of 8
 Ellin
NSE

                                                                                         Page 44 of 200