2017-11-07 P&E Committee - Attachment 1 to Item 1 - Amendments for Multiple Housing Type 2 Duplex & Minor Corrections

                   column 1                                              column 2
               Specific Outcomes                             Acceptable solutions (if accepted




                                                                                                                       Including amendments to 3 July 2017
                                                           development subject to requirements)




                                                                                                           The Noosa Plan
                                                          Probable solutions (if code assessment)
power poles and transformers;

AND

O5 Structures are not constructed under
overhead electricity transmission lines, within
electricity transmission line easements.
14.79     Maximum total signface area for all signs on a site
O6 The maximum signface area of all                    No solution provided.
advertising devices on a site does not unduly
detract from a building, site or local area,
including by:-
a)    visually dominating the appearance of a
      building; or
being visually intrusive in the streetscape or
other setting in which it is located.

O7 The total signface area of all advertising
devices per tenancy does not exceed 0.75m² of
signface area per linear metre of active street
facing building or 10m² whichever is the lesser.

14.80     Illumination, lighting and movement
O8 An advertising device only incorporates             S8.1 Illuminated signs are not located in a
illumination and lighting where it:-                   Residential Zone, Rural Zone or Open Space
a)     is appropriate to its setting and is            Conservation Zone.
       compatible with the visual amenity of the
       surrounding area;                               S8.2 Where the advertising device              is
b)     does not cause an environmental                 illuminated, it:-
       nuisance or distraction;                         a)    has a maximum luminance of 350
c)     does not create glare, reflecting or flaring           candelas per m²;
       of colours; and                                  b)    does not incorporate flashing lights;
d)     will not create a potential safety hazard,       c)    is switched off between 11:00pm and
       including a traffic safety hazard.                     sunset of the following day; and
                                                        d)    is limited to 1 sign per tenancy.

O9 An advertising device does not move or              S9.1 No solution provided.
incorporate elements that give the impression of
movement.

Table 14-47 – Specific requirements for all types of advertising device

Column 1                  Column 2
Advertising device type   Specific requirements
Wall or Facade Sign Types
Business name plate       (a) is limited to one sign per tenancy;
                          (b) is attached to a fence, wall or building face at street level;
                          (c) does not exceed a maximum signface area of 0.3m²;
                          (d) is not illuminated; and
                          (e) has a maximum height of 2 metres.
Wall sign                 (a) does not obscure any window or architectural feature;
                          (b) does not project beyond the edges of the wall to which it is



                                                    14-93
                                          Advertising Devices Code