2017-11-07 P&E Committee - Attachment 1 to Item 1 - Amendments for Multiple Housing Type 2 Duplex & Minor Corrections

                                                  Column 1                  Column 2
            Including amendments to 3 July 2017




                                                  Advertising device type   Specific requirements
The Noosa Plan



                                                                                attached or over the boundary of any adjoining site;
                                                                            (c) does not exceed a maximum signface area of 4m²;
                                                                            (d) is not more than 300mm thick.
                                                  Hamper sign               (a) is limited to that area between the door head and the underside
                                                                                of the verandah or awning roof;
                                                                            (b) does not extend beyond the length of the building wall above the
                                                                                door head;
                                                                            (c) is not more than 300mm thick;
                                                                            (d) does not exceed a maximum signface area of 4m²
                                                  Vertical sign             (a) does not exceed a maximum signface area of 1.5m² per side;
                                                                            (b) does not project beyond any awning or verandah of the building
                                                                                to which it is attached;
                                                                            (c) does not project above the roofline of the building to which it is
                                                                                attached; and
                                                                            (d) is limited to a maximum of one sign per site (including a site with
                                                                                multiple occupancy buildings).
                                                  Stallboard sign           (a) is limited to the area below a street front window;
                                                                            (b) is designed such that the signface is recessed inside the
                                                                                stallboard facing;
                                                                            (c) does not protrude onto a road such that it could injure or
                                                                                obstruct the passage of pedestrians; and
                                                                            (d) does not exceed a maximum signface area of 4m².
                                                  Window sign               (a) does not cover/obscure more than 50% of a window or 4m² is
                                                                                whichever is the lesser.
                                                  Awning sign types
                                                  Above awning sign         (a) is erected only where it can be demonstrated that there is no
                                                                                opportunity to make use of an alternative sign type;
                                                                            (b) does not project above the roofline of the building to which it is
                                                                                attached;
                                                                            (c) does not exceed a total signface area of 1.5m²;
                                                                            (d) is not within 1.5 metres of any side property boundary; and
                                                                            (e) limited to one sign per building.

                                                                            Note—a streetscape or landscape analysis prepared by a competent
                                                                            person may be required in support of a development application for
                                                                            an above awning sign.
                                                  Awning face sign          (a) has a signface area that does not exceed 4m²;
                                                                            (b) does not project above or below the awning face.

                                                  Below awning sign         (a) is oriented at right angles to the building frontage;
                                                                            (b) is not more than 75% of the width of the awning or verandah to
                                                                                which it is attached;
                                                                            (c) has a maximum height of 600mm and maximum depth of
                                                                                300mm;
                                                                            (d) does not exceed a maximum total signface area of 1.5m²;
                                                                            (e) has a minimum clearance of 2.4m between the lowest part of
                                                                                the sign and the footway pavement;
                                                                            (f) is centrally located along the frontage of each shop or tenancy;
                                                                            (g) is not closer than 3 metres to any other under awning sign or
                                                                                within 1.5 metres of any side property boundary; and
                                                                            (h) maximum of one sign per tenancy.
                                                  Freestanding Sign Types
                                                  All freestanding signs    (a) do not exceed a maximum height of 5m and a signface area of
                                                                                4m²;
                                                                            (b) ensure that not more than one (1) freestanding sign is erected
                                                                                on any site (including a site with multiple occupancy buildings.



                                                                                                 14-94
                                                                                       Advertising Devices Code