AS PUBLISHED Information Request MCU24 0074 · MCU24/0074

                 The layout plans submitted by RECOR Engineering and PUSH Architecture include several
                 inconsistencies and aspects requiring further clarification to demonstrate compliance with the
                 Noosa Plan 2020 - Driveways and Parking Code and Australian Carparking Standards
                 (AS/NZS2890). Provide a full set of amended plans addressing the following:


                 Information Required
                 24. Revise the carparking demand for the proposed development based on the Noosa Plan
                     2020 - Driveways and Parking Code carparking rates.
                 25. Based on the above revised assessment amend the design to accommodate the required
                     carparking demand and onsite servicing and carparking spaces.
                 26. The removal of on-street parking spaces from Gympie Terrace is not supported as the
                     Foreshore Master Planning project is not finalised or approved by Council. For this
                     development application, amend the plans to show the existing four on street parking
                     spaces along Gympie Terrace and remove the proposed 15 on street motorcycle parking
                     spaces along Albert Street.
                 27. Demonstrate that the carparking area of the adjoining property at 6 Thomas street is not
                     impacted by the proposed development.
                 28. Amend the GENERAL ARRANGEMENT PLAN - GROUND FLOOR, DRAWING#010,
                     REV B prepared by RECOR Engineering to address the following;
                        a) Include the dimensions for all vehicle spaces including carparks, motorcycle parks
                           and loading bay dimensions in accordance with AS/NSZ2890.1:2004,
                           AS/NSZ2890.2:2004, AS/NSZ2890.6:2009. It is noted that length dimensions are
                           missing for the loading bays.
                        b) Include the location and dimensions of the PWD bay (if proposed) as shown adjacent
                           to the MRV loading bay on the ground floor carpark consistent with the GROUND
                           PLAN DRAWING# 1004, ISSUE 2 prepared by Push Architecture.
                        c) Include the location of Electric Vehicle parks consistent with GROUND PLAN
                           DRAWING# 1004, ISSUE 2 prepared by Push Architecture.
                 29. Amend the plans to include the location and expected area of associated Electric Vehicle
                     charging infrastructure to ensure no conflicts with parking or landscaping areas.




                                                                                                      Page 9 of 12
Document Set ID: 23083379
Version: 6, Version Date: 08/07/2024