2503-45382 SRA - Advice notice

Page 2

2503-45382 SRA




        If you need to make an application for a relevant purpose determination, please find further
        information here: https://www.qld.gov.au/environment/land/management/vegetation/clearing-
        approvals/development-approvals/applying
 State code 16: Native vegetation clearing (State code 16) of SDAP
 2.     Issue:
        It is unclear which plan provided with the application material most accurately reflects the
        proposed development. Further, no digital data (e.g. shapefile) has been provided to show
        all new and relocated infrastructure.

        The information response stated that digital data would not be provided however, SARA
        requires shapefiles to accurately prepare a Vegetation Management Plan (VMP) for conditioning
        the proposed development.

        Furthermore, the information response states that the tallest tree near the infrastructure is 16 m,
        requiring a 24 m firebreak. However, these heights are nearly half of those listed in the technical
        description for the adjacent regional ecosystem (RE). No evidence was provided to show where
        the measured trees were located within the RE, how their heights were measured or any
        supporting images in order for the tree heights of 16m to be used to calculate the
        firebreak/safety buffer distance.

        Action:
           Provide digital data that shows all new and relocated infrastructure within 45 m of the
              category B vegetation and all new fences located within 5 m of the category B vegetation.
              Digital data should include a projected spatial reference (e.g. GDA94 or GDA2020) and
              preferably be in an ESRI compatible format (shapefile, geodatabase or KML).

                 Please note that DWG and CAD drawing files are not sufficient as they are
                 incompatible with ESRI spatial products.

                Provide evidence to support the specified tree height of 16m is representative of the
                 tallest tree heights in the RE adjacent to the infrastructure (i.e. photos and GPS points).
                 In the absence of supporting evidence, the current technical description data of the RE
                 will be used to calculate the firebreak/safety buffer distance.

Please note that unlike an information request, assessment timeframes do not stop when advice
is provided by SARA.

How to respond
Please provide written confirmation of your intended action within 2 days from the date of this
correspondence, otherwise SARA will finalise the assessment of the application based on the information
available.

If you intend to provide additional information, a ‘stop the clock’ notice under chapter 1, part 7, section 32
of the Development Assessment Rules (DA Rules) or an extension will be necessary to ensure sufficient
time in the referral agency assessment period for SARA to review your response and complete its
assessment. Please note that SARA will require a minimum of 10 business days to review your response
after it has been received.




 State Assessment and Referral Agency                                                                Page 2 of 3

Page 3

2503-45382 SRA



If you wish to utilise the ‘stop the clock’ provisions, you must give notice to the assessing authority
(assessment manager or referral agency) whose current period you wish to stop. For SARA, this can be
done through MyDAS2 or via correspondence.

You are requested to upload your response to this advice notice using the ‘manage documents’ function
in MyDAS2.

If you require further information or have any questions about the above, please contact Jodie Wilson,
Senior Planning Officer, on (07) 5352 9778 or via email [email protected] who will be
pleased to assist.

Yours sincerely




Cavannah Deller
A/ Principal Planning Officer

cc        Noosa Shire Council, [email protected]



 Development details

 Description:               Development Permit                     Material Change of Use – Other Change to Expand the Resource
                                                                   Recovery Area (Utility Installation).

 SARA role:                 Referral Agency

 SARA trigger:              Schedule 10, Part 3, Division 4, Table 3, Item 1 (Planning Regulation 2017)
                            Clearing native vegetation

                            Schedule 10, Part 9, Division 4, Subdivision 2, Table 4, Item 1 (Planning Regulation 2017)
                            State transport corridors and future State transport corridors

 SARA reference:            2503-45382 SRA

 Assessment criteria:       State code 1 of SDAP – Development in a state-controlled road environment
                            State code 16 of SDAP – Native vegetation clearing




 State Assessment and Referral Agency                                                                                     Page 3 of 3