Skip to the record
Beware of cheap imitations.

Original source · versioned page text

2015-05-26 Planning & Organisation Committee Agenda

of 171

Page text shows just the words. Original shows the document exactly as it was published.

Page text read automatically using OCR, there may be inaccuracies

Text sections have not been matched to the original PDF pages. Use the original document to check page numbers.

PLANNING & ORGANISATION COMMITTEE MEETING AGENDA                                      26 MAY 2015




     3.    This approval authorises the following signs as defined by the planning scheme and
           shown on the Approved Plans. In this regard the plans must be amended to reflect
           the following:
           a.    one freestanding pillar sign per frontage with a maximum height of 5m. Any
                 pillar sign fronting Walter Hay Drive must be setback half its height from the
                 boundary.
           b.    tenant 1, 2, 3, 4 and 5 (as described on the approved plans) wall signs must not
                 exceed a single sign face area of 4m² and a maximum total sign face area of
                 10m² each.
           c.    one illuminated sign per frontage.
     4.    The approved signs must not be used for the advertisement of goods and/or services
           not sold or conducted on the site (ie. third party advertising).
     5.    The approved signs must be positioned wholly within the property boundaries of the
           subject site, and must not be located within or across any easements.
           Illumination
     6.    The approved illuminated sign must not incorporate flashing lights nor involve
           illumination by any means other than:
           a.    an internal light source
           b.    a down light, if externally lit.
     7.    Illumination resulting from direct, reflected or other incidental light emanating from the
           approved signs must not exceed a luminance of 300 candelas per square metre.
     8.    All sign illumination must be switched off between 11:00pm and sunset of the
           following day except if a service station illuminated sign which may remain on during
           trading hours.
     9.    All conduits, wiring, switches or other electrical apparatus installed on an advertising
           device must be concealed from general view.
           Movement
     10.   The approved signs must not revolve, move, contain moving parts, change its
           message, flash, have a moving or flashing border, or give the impression of
           movement in any way.
           Maintenance
     11.   The approved signs must be properly maintained by the owner of the property to
           ensure the signs continue to comply with the Approved Plans and conditions of this
           Decision Notice.
           Cessation of Use
     12.   The approved signs must be removed from the site upon cessation of an associated
           use.
C.   Find the following are sufficient grounds to justify the decision despite the conflict with the
     Planning Scheme:
     1.    The convenience shop will fulfil a demonstrated need for convenience shopping
           within the area.
     2.    The convenience shop is well located on Noosa’s major road network to capture
           some escape expenditure by servicing the convenience needs of the travelling public.


                                                                                    Page 21 of 171
Log in to download the original file

2015-05-26 Planning & Organisation Committee Agenda(PDF, 7MB).pdf · 7.0 MB (large file)

Large file: the download may take up to a minute.

Searchable page text hides email addresses. Original files are unchanged and may show email addresses.

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.