EGX_PROD_n6829410_191_Hollett_Road,_Noosaville_L53_SP163571

e Access to the easement and access along the easement must be available to
ENERGEX personnel and heavy equipment at all times. ENERGEX will require the
developer / owner to supply and install gates where fencing prohibits access to and
along the easement area. To enable travel along the easement at anytime the
gates must be series locked with an ENERGEX padiock. Both the padlock and a
design drawing of an acceptable gate will be provided by ENERGEX.

e Any costs incurred by ENERGEX as a result of the works on the easement are to
be met by the property developer / owner.

e At ail times the following clearance must be maintained from the top of any
machinery moving in the vicinity of energised conductors:

* 132kV and 110kV conductors — 4.5m minimum clearance

© 33kV and 11kV conductors —- 3m minimum clearance
Should it be necessary to transport equipment or extend any equipment, such
that these clearances cannot be confidently maintained, you are required to
contact our office to ascertain whether a Safety Officer is required on-site. All
operators of machinery are to be made aware of the presence of high voltage
conductors.

e« Any proposal for landscaping on the easement must have prior approval from
ENERGEX. Please submit the relevant landscaping design to Principal Mains
Design Engineer for approval. When considering landscape designs the planting of
trees must be kept to the edges of the easement and not under any overhead
conductors. When mature, plants or trees must not grow in excess of 4 metres in
height. If pertinent the ENERGEX Guide to “Powerline Friendly Plants” will be
enclosed, please refer to this Guide for recommended species.

Reference: HBD313709 - (7140/23/11 P23-02) — L1167