SUPERSEDED Decision Notice - Approved by Delegation of Authority - DBW25 0051 & OPW25 0054 (As Published) · OPW25/0054

               10.    A Construction Management Plan must be submitted to Council at least 5 working days prior
                      to any works commencing. The Construction Management Plan must address the following:
                           a.     appropriate traffic signage in accordance with the Manual of Uniform Traffic Control
                                  Devices (MUTCD)
                           b.     provision for safe pedestrian and vehicle access across the frontage of the site both
                                  during daily construction and after daily construction has ceased.
               11.    Any changes to the details associated with the Principal Contractor during construction, must
                      be notified to council in writing within five business days of the change occurring.
               12.    Any conflict between the development and an existing or proposed service must be referred
                      to the relevant service authority for determination prior to commencement of works.
               DURING CONSTRUCTION
                      Engineering
               13.    The developer must meet any costs to repair damage to any Council asset during
                      construction, where damage is a result of the development works. Damage to assets must
                      be repaired immediately where it creates a hazard to the community. In circumstances where
                      the damage does not create a hazard to the community, it must be repaired immediately on
                      completion of the works associated with the development.
               14.    All works must be constructed and work procedure undertaken in accordance with:
                      a.        The approved plans/documents and conditions detailed in this Decision Notice
                      b.        All relevant Noosa Council Planning Scheme Policies, standard drawings, standard
                                specifications and guidelines
                      c.        The latest version of the Healthy Waterways document “Water Sensitive Urban Design
                                Technical Design Guidelines for South East Queensland” for all water quality devices
                                to be constructed on site
                      Pavement Design and Construction
               15.    Pavement design for privately owned works must be undertaken in accordance with the
                      relevant standards. Structural integrity of the driveway and car park areas will remain the
                      responsibility of the property owner/developer.
                      Works within Road Reserve/Reinstatement
               16.    Safe pedestrian and vehicle access on all streets in the vicinity of the development must be
                      maintained at all times. Should footpath/road closures be necessary to carry out construction
                      works, Council’s Engineering Officer must be notified prior to the proposed closure and all
                      requirements complied with.
               17.    All frontage works must match neatly with existing road and verge/footpath features.
                      Additional works beyond the frontage may be required to provide an acceptable transition to
                      existing road and verge/footpath profiles.
               18.    Electrical conduits or other services proposed to be installed within existing and proposed
                      road reserves under existing sealed carriageways, concrete pathways, concrete/sealed
                      driveways or significant vegetation must be installed by boring. Trenching is not permitted,
                      unless specifically approved by Council.
                      Driveways
               19.    Driveway crossovers must be constructed generally in accordance with Council’s Standard
                      Drawings RS-049 and RS-050 and any associated addendum.
               20.    Any existing unnecessary or redundant property accesses must be removed, and the kerb,
                      footpath and verge area reinstated to match the existing footpath and/or verge treatments.
                      Grassed verge areas to be reinstated must be provided with 100 mm topsoil and grass seed
                      or turf, and must be maintained by the developer until established.



                                                                                                         Page 6 of 12
Document Set ID: 23877592
Version: 5, Version Date: 10/07/2025