MCU14/0073 - Decision Notice - 1036841

                                                                                                              SDA-0914-014464




                              a.       restore the habitat value of the land to meet the characteristics of the
                                       appropriate regional ecosystem
                              b.       return the land to its natural undisturbed state, where practicable. Where
                                       impracticable, provide justification.
                              c.       The treatment of undesirable species, as defined within Planning Scheme
                                       Policy 3 Landscaping Plants and Guidelines of the Noosa Plan.
                      ENVIRONMENTAL HEALTH
                      Refuse Management
                      23.     The developer must provide waste storage and disposal facilities in accordance
                              with Planning Scheme Policy No. 9 “Waste Management Multi-Dwellings and
                              Commercial and Industrial Premises”, including an external imperviously paved
                              area correctly sized for all refuse and recycling containers and suitably screened
                              from public places and neighbouring properties. A bin wash area is required with a
                              cold-water tap, hose and drain outlet connected to the effluent disposal system, via
                              a bucket trap. The drain outlet is to be designed to prevent storm water entry to the
                              effluent system and this can be achieved with a nib wall 50mm high and up to
                              700mm x 700mm wide (max 0.5m²), or alternatively the waste area can be roofed,
                              or any other design approved by Council’s delegate.
                      24.     The development must allow refuse-loading areas to be located off street. All
                              vehicles associated with the collection of waste/recyclables, shall enter and leave
                              the site in a forward direction.
                      25.     A Waste Management Plan (Operational) in accordance with Planning Scheme
                              Policy No. 9 “Waste Management Multi-Dwellings and Commercial and Industrial
                              Premises”, shall be developed and implemented on site. The Waste Management
                              Plan must include the following as a minimum: -
                                      The types and estimated volumes of waste that will be generated from the
                                       activities approved within the development.
                                       Methods to be used for dealing with garden waste.
                                       Initiatives to minimise waste either by waste prevention, reduction, re-use or
                                       recycling.
                                      Description of procedures and clearly identified site responsibilities for all site
                                       occupants for getting all waste to the bins; the storage of bins and the
                                       collection of bins by the contractor.
                                       A description of the design details of waste storage and recycling areas
                                       including size, location, elevation and floor plan, methods of bin washing and
                                       system to prevent storm water getting into the effluent system via the bin
                                       wash.
                                      A description of types and volume of waste storage containers to be used,
                                       and the collection frequency of containers,
                                      The waste and recycling storage area shall include the provision of
                                       containers for all waste and recycling materials including putrescible matter,
                                       non-recycling waste, paper/ cardboard, glass, aluminum/steel cans, waste
                                       oil, Styrofoam boxes, etc.




                     Department of State Development, Infrastructure and Planning                               Page 6
Document Set ID: 19845988
Version: 1, Version Date: 22/12/2014