Decision Notice - 010.2006.00001395.001 [As Published] · 132006.1395

NOOSA COUNCIL IDAS Development Application Decision Notice                                                 10 of 17


       It is critical that waste areas are properly planned. A copy of Planning Scheme Policy No. 9 explaining
       exactly how to predict waste quantities and design waste areas is available from Council and the web.
       The Plan shall include the following information: -
            The types of waste that will be generated from the activities approved within the development.
            Estimated volumes or tonnage of both recyclables and waste generated.
            Methods to be used for dealing with garden waste.
            Initiatives to minimize waste either by waste prevention, reduction, re-use or recycling.
            Description of procedures for getting all waste to the bins; the storage of bins and the collection of
              bins by the contractor.
            A description of the design details of waste storage and recycling areas including size, location,
              elevation and floor plan, methods of bin washing and system to prevent storm water getting into
              sewer via the bin wash.
            A description of types and volume of waste storage containers to be used.
            The waste and recycling storage area shall include the provision of containers for all waste and
              recycling materials including putresable matter, non-recycling waste, paper/ cardboard, glass,
              aluminum/steel cans, waste oil, styrofoam boxes, etc, and bin washing facilities connected to
              sewer.
            A detailed description of vehicular access to collect waste. Where collection is off street, access
              must allow vehicles to enter and leave the site in a forward direction.
72.    A Waste Management Plan (construction and demolition) shall be submitted prior to demolition, removal
       or relocation of any building other than a shed.
       A Waste Management Plan (construction and demolition) is also required for construction of 15 or more
       dwelling units or for any business use of greater than 500m².
       Waste Management Plans (construction and demolition) are required to be submitted in accordance with
       Planning Scheme Policy 11, Waste Management Plans see table below.
       Waste storage areas are to provide for adequate separation of all reusable, recyclable and waste
       materials. These shall be located so that they are convenient and safe to use. (Refer to Noosa Council
       Waste Management Code).
       The Plan shall contain the following information:
            The site area for the storage and separation of waste is to be shown on the plan drawings
              accompanying the application.
            A waste management table as indicated below is to be completed showing how waste material is
              to be segregated - recycled – reused or disposed.




MSOffice c:\docume~1\shesse\locals~1\temp\bcl technologies\easypdf 5\@bcl@ec126c42\@[email protected]