Skip to the record
Noosa’s premier civic archive.

Original source · versioned page text

C_Disc.lst

From the archive CALPOST.zip (folder CALPOST/AMG_Newplan), inside Part Response to Information Request (Odour Modelling) - MCU21/0110 - Email 1 of 2. File date in the archive: 2018-08-21 08:27.

of 3

Page text shows just the words. Original shows the document exactly as it was published.

concentrations.                                                                                                                                         
                                                                                                                                                                                                         
      (M8_MODE) -- Default: 5     ! M8_MODE=  5   !                                                                                                                                                      
                   FLAG (2010)                                                                                                                                                                           
                                                                                                                                                                                                         
           1 = Use hourly RH values from VISB.DAT file with hourly                                                                                                                                       
               modeled and monthly background concentrations.                                                                                                                                            
           2 = Use monthly RH from monthly RHFAC and EPA (2003) f(RH) tabulation                                                                                                                         
               with hourly modeled and monthly background concentrations.                                                                                                                                
               (VISB.DAT file is NOT needed).                                                                                                                                                            
           3 = Use monthly RH from monthly RHFAC with EPA (2003) f(RH) tabulation                                                                                                                        
               with daily modeled and monthly background concentrations.                                                                                                                                 
               (VISB.DAT file is NOT needed).                                                                                                                                                            
           4 = Use monthly RHFSML, RHFLRG, and RHFSEA with hourly modeled                                                                                                                                
               and monthly background concentrations.                                                                                                                                                    
               (VISB.DAT file is NOT needed).                                                                                                                                                            
           5 = Use monthly RHFSML, RHFLRG, and RHFSEA with daily modeled                                                                                                                                 
               and monthly background concentrations.                                                                                                                                                    
               (VISB.DAT file is NOT needed).                                                                                                                                                            
                                                                                                                                                                                                         
      Background extinction coefficients are computed from monthly                                                                                                                                       
      CONCENTRATIONS of sea salt (BKSALT).  Month 1 is January.                                                                                                                                          
      (ug/m**3)                                                                                                                                                                                          
                                                                                                                                                                                                         
      (BKSALT) -- No default     ! BKSALT= 0, 0, 0, 0,                                                                                                                                                   
                                           0, 0, 0, 0,                                                                                                                                                   
                                           0, 0, 0, 0 !                                                                                                                                                  
                                                                                                                                                                                                         
      Extinction coefficients for hygroscopic species (modeled and                                                                                                                                       
      background) can be computed using monthly RH adjustment factors                                                                                                                                    
      in place of an hourly RH factor (VISB.DAT file is NOT needed).                                                                                                                                     
      Enter the 12 monthly factors here (RHFSML,RHFLRG,RHFSEA).                                                                                                                                          
      Month 1 is January.  (Used if M8_MODE = 4 or 5)                                                                                                                                                    
                                                                                                                                                                                                         
      Small ammonium sulfate and ammonium nitrate particle sizes                                                                                                                                         
      (RHFSML) -- No default     ! RHFSML= 0, 0, 0, 0,                                                                                                                                                   
                                           0, 0, 0, 0,                                                                                                                                                   
                                           0, 0, 0, 0 !                                                                                                                                                  
                                                                                                                                                                                                         
      Large ammonium sulfate and ammonium nitrate particle sizes                                                                                                                                         
      (RHFLRG) -- No default     ! RHFLRG= 0, 0, 0, 0,                                                                                                                                                   
                                           0, 0, 0, 0,                                                                                                                                                   
                                           0, 0, 0, 0 !                                                                                                                                                  
                                                                                                                                                                                                         
      Sea salt particles                                                                                                                                                                                 
      (RHFSEA) -- No default     ! RHFSEA= 0, 0, 0, 0,                                                                                                                                                   
                                           0, 0, 0, 0,                                                                                                                                                   
                                           0, 0, 0, 0 !                                                                                                                                                  
                                                                                                                                                                                                         
     Additional inputs used for MVISBK = 2,3,5,6,7,8:                                                                                                                                                    
     ------------------------------------------------                                                                                                                                                    
      Extinction due to Rayleigh scattering is added (1/Mm)                                                                                                                                              
                              (BEXTRAY) -- Default: 10.0 ! BEXTRAY = 10 !                                                                                                                                
                                                                                                                                                                                                         
 !END!                                                                                                                                                                                                   
 -------------------------------------------------------------------------------                                                                                                                         
                                                                                                                                                                                                         
 INPUT GROUP: 3 -- Output options                                                                                                                                                                        
 --------------                                                                                                                                                                                          
                                                                                                                                                                                                         
 Documentation                                                                                                                                                                                           
 -------------                                                                                                                                                                                           
                                                                                                                                                                                                         
     Documentation records contained in the header of the                                                                                                                                                
     CALPUFF output file may be written to the list file.                                                                                                                                                
     Print documentation image?                                                                                                                                                                          
                                 (LDOC) -- Default: F   !  LDOC = F !                                                                                                                                    
                                                                                                                                                                                                         
                                                                                                                                                                                                         
 Types of tabulations reported                                                                                                                                                                           
 ------------------------------                                                                                                                                                                          
                                                                                                                                                                                                         
    1) Visibility: daily visibility tabulations are always reported                                                                                                                                      
                   for the selected receptors when ASPEC = VISIB.                                                                                                                                        
                   In addition, any of the other tabulations listed                                                                                                                                      
                   below may be chosen to characterize the light                                                                                                                                         
                   extinction coefficients.                                                                                                                                                              
                   [List file or Plot/Analysis File]                                                                                                                                                     
                                                                                                                                                                                                         
                                                                                                                                                                                                         
    2) Top 50 table for each averaging time selected                                                                                                                                                     
       [List file only]                                                                                                                                                                                  
                             (LT50) -- Default: T   !   LT50 = T  !                                                                                                                                      
                                                                                                                                                                                                         
    3) Top 'N' table for each averaging time selected                                                                                                                                                    
       [List file or Plot file]                                                                                                                                                                          
                            (LTOPN) -- Default: F   !  LTOPN = T  !                                                                                                                                      
                                                                                                                                                                                                         
         -- Number of 'Top-N' values at each receptor                                                                                                                                                    
            selected (NTOP must be <= 4)                                                                                                                                                                 
                             (NTOP) -- Default: 4   ! NTOP =  2   !                                                                                                                                      
                                                                                                                                                                                                         
         -- Specific ranks of 'Top-N' values reported                                                                                                                                                    
            (NTOP values must be entered)                                                                                                                                                                
                    (ITOP(4) array) -- Default:     ! ITOP =  1 , 2 !                                                                                                                                    
                                       1,2,3,4                                                                                                                                                           
                                                                                                                                                                                                         
         -- Screen applied to values before updating stored ranks                                                                                                                                        
                            (ITOPS) -- Default: 0   ! ITOPS =  0   !                                                                                                                                     
                                                                                                                                                                                                         
            0 = No screen: all values at each receptor are ranked                                                                                                                                        
                           (rank 1 and rank 2 may be in same day)                                                                                                                                        
            1 = Day screen: only peak value in day at each receptor                                                                                                                                      
                            is ranked                                                                                                                                                                    
                           (rank 1 and rank 2 may not be in same day)                                                                                                                                    
                                                                                                                                                                                                         
                                                                                                                                                                                                         
    4) Threshold exceedance counts for each receptor and each averaging                                                                                                                                  
       time selected                                                                                                                                                                                     
       [List file or Plot file]                                                                                                                                                                          
                            (LEXCD) -- Default: F   !  LEXCD = F  !                                                                                                                                      
                                                                                                                                                                                                         
                                                                                                                                                                                                         
         -- Counts for the shortest averaging period selected can be                                                                                                                                     
            tallied daily, and receptors that experience more than NCOUNT                                                                                                                                
            counts over any NDAY period will be reported.  This type of                                                                                                                                  
            exceedance violation output is triggered only if NDAY > 0.                                                                                                                                   
                                                                                                                                                                                                         
            Accumulation period(Days)                                                                                                                                                                    
                             (NDAY) -- Default: 0   !    NDAY =  0  !                                                                                                                                    
            Number of exceedances allowed                                                                                                                                                                
                           (NCOUNT) -- Default: 1   !  NCOUNT =  1  !                                                                                                                                    
                                                                                                                                                                                                         
                                                                                                                                                                                                         
    5) Selected day table(s)                                                                                                                                                                             
                                                                                                                                                                                                         
       Echo Option -- Many records are written each averaging period                                                                                                                                     
       selected and output is grouped by day                                                                                                                                                             
       [List file or Plot file]                                                                                                                                                                          
                            (LECHO) -- Default: F   !  LECHO = F  !                                                                                                                                      
                                                                                                                                                                                                         
       Timeseries Option -- Averages at all selected receptors for                                                                                                                                       
       each selected averaging period are written to timeseries files.                                                                                                                                   
       Each file contains one averaging period, and all receptors are                                                                                                                                    
       written to a single record each averaging time.                                                                                                                                                   
       [TSERIES_ASPEC_ttHR_CONC_TSUNAM.DAT files]                                                                                                                                                        
                            (LTIME) -- Default: F   !  LTIME = T  !                                                                                                                                      
                                                                                                                                                                                                         
       Peak Value Option -- Averages at all selected receptors for                                                                                                                                       
       each selected averaging period are screened and the peak value                                                                                                                                    
       each period is written to timeseries files.                                                                                                                                                       
       Each file contains one averaging period.                                                                                                                                                          
       [PEAKVAL_ASPEC_ttHR_CONC_TSUNAM.DAT files]                                                                                                                                                        
                            (LPEAK) -- Default: F   !  LPEAK = F  !                                                                                                                                      
                                                                                                                                                                                                         
         -- Days selected for output                                                                                                                                                                     
                       (IECHO(366)) -- Default: 366*0                                                                                                                                                    
            ! IECHO  = 366*1  !                                                                                                                                                                          
            (366 values must be entered)                                                                                                                                                                 
                                                                                                                                                                                                         
 Plot output options                                                                                                                                                                                     
 -------------------                                                                                                                                                                                     
                                                                                                                                                                                                         
      Plot files can be created for the Top-N, Exceedance, and Echo                                                                                                                                      
      tables selected above.  Several formats for these files are available:                                                                                                                             
       - Tabular listings for ALL selected receptors, reporting the (x,y)                                                                                                                                
         location and value(s) in columns                                                                                                                                                                
           .DAT -- Columns are formatted for direct viewing in text editors                                                                                                                              
           .CSV -- Columns are delimited by commas                                                                                                                                                       
       - Raster formats in which results at GRIDDED receptors ONLY are                                                                                                                                   
         written using a compact representation.                                                                                                                                                         
           .GRD -- SURFER(R) plotting software format                                                                                                                                                    
           .ASC -- ESRI ASCII Grid format                                                                                                                                                                
      The CSV (comma-separated-variable) format is useful for importing                                                                                                                                  
      results into software that automatically recognizes CSV files.                                                                                                                                     
      The SURFER and ESRI raster formats are similar, but are specific                                                                                                                                   
      to the type of software indicated.  GRD files can be read directly                                                                                                                                 
      into SURFER.  ASC files can be read into ArcMap/ArcGIS systems.                                                                                                                                    
                                                                                                                                                                                                         
      Generate Plot file output in addition to writing tables                                                                                                                                            
      to List file (ECHO goes to either List or Plot)?                                                                                                                                                   
                                  (LPLT) -- Default: F   ! LPLT  = F !                                                                                                                                   
                                                                                                                                                                                                         
      Plot cumulative values in addition to incremental values?                                                                                                                                          
                                  (LCUM) -- Default: F   ! LCUM = F !                                                                                                                                    
                                                                                                                                                                                                         
      Plot file format?         (PLOTFM) -- Default: 1   ! PLOTFM =  3  !                                                                                                                                
                                                                                                                                                                                                         
           1 = .DAT  CALVIEW/SURFER (formatted columns)                                                                                                                                                  
           2 = .CSV  ArcMap/ArcGIS  (comma-separated-variable columns)                                                                                                                                   
           3 = .GRD  CALVIEW/SURFER (SURFER 2D grid raster format)                                                                                                                                       
           4 = .ASC  ArcMap/ArcGIS  (ESRI ASCII 2D grid raster format)                                                                                                                                   
                                                                                                                                                                                                         
                                                                                                                                                                                                         
 Auxiliary Output Files (for subsequent analyses)                                                                                                                                                        
 ------------------------------------------------                                                                                                                                                        
                                                                                                                                                                                                         
       Visibility                                                                                                                                                                                        
                                                                                                                                                                                                         
       A separate output file may be requested that contains the change                                                                                                                                  
       in visibility at each selected receptor when ASPEC = VISIB.  This                                                                                                                                 
       file can be processed to construct visibility measures that are                                                                                                                                   
       not available in CALPOST.                                                                                                                                                                         
                                                                                                                                                                                                         
       Output file with the visibility change at each receptor?                                                                                                                                          
                                 (MDVIS) -- Default: 0   ! MDVIS  =  0  !                                                                                                                                
                                                                                                                                                                                                         
            0 =  Do Not create file                                                                                                                                                                      
            1 =  Create file of DAILY (24 hour) Delta-Deciview                                                                                                                                           
            2 =  Create file of DAILY (24 hour) Extinction Change (%)                                                                                                                                    
            3 =  Create file of HOURLY Delta-Deciview                                                                                                                                                    
            4 =  Create file of HOURLY Extinction Change (%)                                                                                                                                             
                                                                                                                                                                                                         
                                                                                                                                                                                                         
 Additional Debug Output                                                                                                                                                                                 
 -----------------------                                                                                                                                                                                 
                                                                                                                                                                                                         
    Output selected information to List file                                                                                                                                                             
     for debugging?                                                                                                                                                                                      
                                (LDEBUG) -- Default: F  ! LDEBUG  = F !                                                                                                                                  
                                                                                                                                                                                                         
    Output hourly extinction information to REPORT.HRV?                                                                                                                                                  
     (Visibility Method 7)                                                                                                                                                                               
                               (LVEXTHR) -- Default: F  ! LVEXTHR = F !                                                                                                                                  
                                                                                                                                                                                                         
 !END!                                                                                                                                                                                                   
 -------------------------------------------------------------------------------                                                                                                                         
                                                                                                                                                                                                         
 INPUT GROUP: 4 -- Species processing information                                                                                                                                                        
 --------------                                                                                                                                                                                          
                                                                                                                                                                                                         
 Definitions:                                                                                                                                                                                            
 ------------                                                                                                                                                                                            
                                                                                                                                                                                                         
       Species to process        (ASPEC) -- No default                                                                                                                                                   
       Notes --                                                                                                                                                                                          
         a. ASPEC = VISIB for visibility processing                                                                                                                                                      
                                                                                                                                                                                                         
       Layer/deposition code    (ILAYER) -- Default: 1                                                                                                                                                   
         '1'  for CALPUFF concentrations,                                                                                                                                                                
         '-1' for dry deposition fluxes,                                                                                                                                                                 
         '-2' for wet deposition fluxes,                                                                                                                                                                 
         '-3' for wet+dry deposition fluxes.                                                                                                                                                             
       Notes --                                                                                                                                                                                          
         a. Use actual model layer when processing                                                                                                                                                       
            3D gridded concentration data                                                                                                                                                                
                                                                                                                                                                                                         
       Units for Output          (IPRTU) -- Default: 0                                                                                                                                                   
                 Concentration Deposition                                                                                                                                                                
                 -------------    ----------                                                                                                                                                             
       -4 =         ppt                        parts per trillion                                                                                                                                        
       -3 =         ppb                        parts per billion                                                                                                                                         
       -2 =         ppm                        parts per million                                                                                                                                         
       -1 =         %                          percent                                                                                                                                                   
        0 =        (data)         (data)       use units from data file                                                                                                                                  
        1 =         g/m**3         g/m**2/s                                                                                                                                                              
        2 =        mg/m**3        mg/m**2/s                                                                                                                                                              
        3 =        ug/m**3        ug/m**2/s                                                                                                                                                              
        4 =        ng/m**3        ng/m**2/s                                                                                                                                                              
        5 =      Odour Units                                                                                                                                                                             
       11 =        TBq/m**3       TBq/m**2/s    TBq=terabecquerel                                                                                                                                        
       12 =        GBq/m**3       GBq/m**2/s    GBq=gigabecquerel                                                                                                                                        
       13 =         Bq/m**3        Bq/m**2/s    Bq=becquerel (disintegrations/s)                                                                                                                         
       Notes --                                                                                                                                                                                          
         a. Use IPRTU=0 to retain the units in the data file                                                                                                                                             
         b. Mass concentration output units (e.g. ug/m**3) are allowed                                                                                                                                   
            only if input data are in mass concentration units                                                                                                                                           
         c. Volume concentration output units (e.g. ppb) are allowed                                                                                                                                     
            only if input data are in volume concentration units                                                                                                                                         
         d. Radiation output units (e.g. GBq/m**3) are allowed                                                                                                                                           
            only if input data are in radiation units                                                                                                                                                    
         e. Visibility extinction expressed in 1/Mega-meters (IPRTU is ignored)                                                                                                                          
                                                                                                                                                                                                         
       Scaling of the form:  X(new) = X(old) * A + B                                                                                                                                                     
       Multiplicative Factor           (A) -- Default:  0.0                                                                                                                                              
       Additive Term                   (B) -- Default:  0.0                                                                                                                                              
       Notes --                                                                                                                                                                                          
         a. Scaling is NOT applied if A = B = 0.0                                                                                                                                                        
         b. Additive term B must be provided in the IPRTU output units                                                                                                                                   
                                                                                                                                                                                                         
       Averaging time(s) reported                                                                                                                                                                        
         1-pd averages           (L1PD) -- Default: T                                                                                                                                                    
         (pd = averaging period of model output)                                                                                                                                                         
         1-hr averages           (L1HR) -- Default: T                                                                                                                                                    
         3-hr averages           (L3HR) -- Default: T                                                                                                                                                    
         24-hr averages         (L24HR) -- Default: T                                                                                                                                                    
         Run-length averages    (LRUNL) -- Default: T                                                                                                                                                    
         User-specified averaging time in hours, minutes, seconds                                                                                                                                        
         (results for averaging time are reported if it is not zero)                                                                                                                                     
                                (NAVGH) -- Default: 0                                                                                                                                                    
                                (NAVGM) -- Default: 0                                                                                                                                                    
                                (NAVGS) -- Default: 0                                                                                                                                                    
                                                                                                                                                                                                         
       Threshold concentrations (output units)                                                                                                                                                           
       used to tally threshold exceedance counts for each averaging time                                                                                                                                 
       (used only if LEXCD = T)                                                                                                                                                                          
         Threshold for  1-hr averages   (THRESH1) -- Default: -1.0                                                                                                                                       
         Threshold for  3-hr averages   (THRESH3) -- Default: -1.0                                                                                                                                       
         Threshold for 24-hr averages  (THRESH24) -- Default: -1.0                                                                                                                                       
         Threshold for NAVG-hr averages (THRESHN) -- Default: -1.0                                                                                                                                       
                                                                                                                                                                                                         
                                                                                                                                                                                                         
 Values:                                                                                                                                                                                                 
 -------                                                                                                                                                                                                 
                                                                                                                                                                                                         
     Assign NSPEC comma-separated values on a line for each of the variables                                                                                                                             
     in this group to identify which species are processed, and to provide                                                                                                                               
     species-related inputs.                                                                                                                                                                             
     Species names must have 12 non-blank characters or less.                                                                                                                                            
     Visibility applications must have only 1 species, and it must be VISIB.                                                                                                                             
                                                                                                                                                                                                         
     Variable Default  Assignment (VARIABLE = v(1), v(2), ... v(NSPEC))                                                                                                                                  
     -------- -------  ------------------------------------------------                                                                                                                                  
     Species  (none)  !ASPEC   = ODOUR           !                                                                                                                                                       
     Layer      1     !ILAYER  = 1              !                                                                                                                                                        
     Units      1     !IPRTU   = 5              !                                                                                                                                                        
     Multiply  0.0    !A       = 0.00000E00     !                                                                                                                                                        
     Add       0.0    !B       = 0.00000E00     !                                                                                                                                                        
     Averages --                                                                                                                                                                                         
     1-pd       T     !L1PD    = F              !                                                                                                                                                        
     1-hr       T     !L1HR    = T              !                                                                                                                                                        
     3-hr       T     !L3HR    = F              !                                                                                                                                                        
     24-hr      T     !L24HR   = T              !                                                                                                                                                        
     Run-length T     !LRUNL   = T              !                                                                                                                                                        
     User-Hr    0     !NAVGH   = 0              !                                                                                                                                                        
     User-Min   0     !NAVGM   = 0              !                                                                                                                                                        
     User-Sec   0     !NAVGS   = 0              !                                                                                                                                                        
     Exceedance Thresholds --                                                                                                                                                                            
     1-hr     -1.0    !THRESH1 = -1.00000E00    !                                                                                                                                                        
     3-hr     -1.0    !THRESH3 = -1.00000E00    !                                                                                                                                                        
     24-hr    -1.0    !THRESH24= -1.00000E00    !                                                                                                                                                        
     NAVG-hr  -1.0    !THRESHN = -1.00000E00    !                                                                                                                                                        
                                                                                                                                                                                                         
   !END!                                                                                                                                                                                                 

 -------------------------------------------------
 NOTICE: Starting year in control file sets the
         expected century for the simulation.  All
         YY years are converted to YYYY years in
         the range:         1966        2065
 -------------------------------------------------

  
**********************************************************************************************************************************
                                              CALPOST  Version 7.1.0         Level 141010      
**********************************************************************************************************************************
  
  


  CALPOST Control File Input Summary -------------------------

     Replace run data with data in Puff file 1=Y:    1
                       Run starting date -- year: 2016
                                           month:    1
                                             day:    1
                                      Julian day:    0
             Time at start of run  -  hour(0-23):    0
                                   -      minute:    0
                                   -      second:    0

                         Run ending date -- year: 2017
                                           month:    1
                                             day:    1
                                      Julian day:    0
               Time at end of run  -  hour(0-23):    0
                                   -      minute:    0
                                   -      second:    0


                                  Base time zone: from CALPUFF

 Every period of data processed -- NREP = 1


  SAMPLER option
                               Processing method: 0
                   0= SAMPLER option not used
                   1= Report total modeled impact (list file)
                   2= TRACEBACK mode (DAT files)
                   3= TRACEBACK mode with sampling factor (DAT files)


  Source information
                  Source contribution processing: 0
                   0= No source contributions
                   1= Contributions are summed
                   2= TRACEBACK mode for 1 receptor
                   3= Reported TOTAL is processed


  Receptor information
                    Gridded receptors processed?: F
                   Discrete receptors processed?: T
       CTSG Complex terrain receptors processed?: F

  Discrete Receptors Processed

   (All Discrete Receptors are Used)

  TOP-N ranked values Reported


  Species & Concentration/Deposition Information
                        Requested Species Number:    1
                                         Species: ODOUR       
                         Layer of processed data:    1
     (>0=conc, -1=dry flux, -2=wet flux, -3=wet & dry flux)
                   Multiplicative scaling factor: 0.0000E+00
                           Additive scaling term: 0.0000E+00
                  Hourly background values used?: F


  Visibility Processing is NOT Selected   



  Output options
                      Units requested for output:   (Odour Units)

  Averaging time(s) selected
        User-specified averaging time (hr:mm:ss):     0: 0: 0
                                   1-pd averages:     F
                                   1-hr averages:     T
                                   3-hr averages:     F
                                  24-hr averages:     T
                         User-specified averages:     F
                          Length of run averages:     T

  Output components selected
                                          Top-50:     T
                   Top-N values at each receptor:     T
              Exceedance counts at each receptor:     F
       Output selected information for debugging:     F
                   Echo tables for selected days:     F
                   Time-series for selected days:     T
        Peak value Time-series for selected days:     F

  Top "n" table control
         Number of "top" values at each receptor:     2
         Specific ranks of "top" values reported:   1   2


  Plot file option
                              Plot files created:     F


  Days selected for output tables
     1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111
     1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111
     1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  1111111111
     1111111111  1111111111  1111111111  1111111111  1111111111  1111111111  111111
  
**********************************************************************************************************************************
                                              CALPOST  Version 7.1.0         Level 141010      
**********************************************************************************************************************************
  
  

 MAPSPEC:  Species Mapping
   Number of species-levels in file  :            1
   Number of species-levels processed:            2

   Input species-levels in file processed
   Input ID  Processing ID     Name
       1           1          ODOUR         1

   All processed species-levels available
             Processing ID     Name
                   1          ODOUR         1
                   2          NO2           1

   Processed species-level associated with background
             Processing ID     Name
                   1          ODOUR         1

      Visibility Species
             Processing ID     Name
no2gas             2          NO2           1



 IDENTIFICATION OF PROCESSED MODEL FILE ----------

 CALPUFF     7.2.1       150618      

                                                                                 
                                                                                 
                                                                                 

 Averaging time for values reported from model:
                 1    HOUR

 Number of averaging periods in file from model:
              8784

 Chemical species names for each layer in model:
 ODOUR         1



 QA Information -- Internal Representation of Data

 CONTENTS OF CONTROL FILE ------------------------
  METRUN              =           1
      (so times in model output file are used)
  isyr,ismo,isdy      =        2016           1           1
  ishr,ismin,issec    =           0           0           0
  ieyr,iemo,iedy      =        2017           1           1
  iehr,iemin,iesec    =           0           0           0
  nper                =        8784

 Data may be processed only within certain hours
     Hour 01 is processed for all averages
     Hour 02 is processed for all averages
     Hour 03 is processed for all averages
     Hour 04 is processed for all averages
     Hour 05 is processed for all averages
     Hour 06 is processed for all averages
     Hour 07 is processed for all averages
     Hour 08 is processed for all averages
     Hour 09 is processed for all averages
     Hour 10 is processed for all averages
     Hour 11 is processed for all averages
     Hour 12 is processed for all averages
     Hour 13 is processed for all averages
     Hour 14 is processed for all averages
     Hour 15 is processed for all averages
     Hour 16 is processed for all averages
     Hour 17 is processed for all averages
     Hour 18 is processed for all averages
     Hour 19 is processed for all averages
     Hour 20 is processed for all averages
     Hour 21 is processed for all averages
     Hour 22 is processed for all averages
     Hour 23 is processed for all averages
     Hour 24 is processed for all averages
  aspec,ilayer        =ODOUR                  1
  asplv               =ODOUR         1
  NO2CALC             =           1
  NO2 Converted from NOx by Single Factor
     RNO2NOX          =   1.00000000    
  MSOURCE             =           0
  MCALMPRO            =           0
  MET1FMT             =           1
  LG,LD,LCT,LDRING    = F T F F
  IBGRID,IEGRID       =          -1          -1
  JBGRID,JEGRID       =          -1          -1
  NDRECP              =
-1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
 0 0 0 0 0 0 0 0 0 0 0
  a,b,LSCALE          =   0.00000000       0.00000000     F
  (b is in internal data units)
  LBACK               = F
  MVISBK              =           8
  MVISCHECK           =           1
  AREANAME            =USER                                                        
  MFRH                =           4
  RHMAX,BEXTRAY       =   98.0000000       10.0000000    
  RHFRAC,BEXTBK       =   0.00000000       0.00000000    
  LVSO4,LVNO3,LVNO2   = T T T
  LVOC,LVEC           = T T
  LVPMC,LVPMF,LVBK    = T T T
  SPECPMC,SPECPMF     =PMC         PMF         
  EEPMC,EEPMF,EEPMCBK =  0.600000024       1.00000000      0.600000024    
  EESO4,EENO3,EEOC    =   3.00000000       3.00000000       4.00000000    
  EESO4S,EENO3S,EEOCS =   2.20000005       2.40000010       2.79999995    
  EESO4L,EENO3L,EEOCL =   4.80000019       5.09999990       6.09999990    
  EESOIL,EEEC,EENO2   =   1.00000000       10.0000000      0.175500005    
  navg,ntop           =           0           2
  navgh,navgm,navgs   =           0           0           0
  itop                =           1           2
  itops               =           0
  L[1,3,24]HR         = T F T
  LNAVG, LRUNL        = F T
  LT50, LTOPN, LEXCD  = T T F
  LECHO, LTIME, LPEAK = F T F
  LCUM                = F
  THRESH1             =  -1.00000000    
  THRESH3             =  -1.00000000    
  THRESH24            =  -1.00000000    
  THRESHN             =  -1.00000000    
  (Thresholds in output data units)(Odour Units)
  STHRESH1            =  -1.00000000    
  STHRESH3            =  -1.00000000    
  STHRESH24           =  -1.00000000    
  STHRESHN            =  -1.00000000    
  (S-Thresholds in internal data units)
  LPLT,IPLOTFM        = F           3
  MDVIS               =           0
  LDEBUG              = F
  LCTSG               = F

 CONTENTS OF HEADER OF MODEL OUTPUT FILE ---------
  model :   CALPUFF     7.2.1       150618      
  msyr,mjsday      =        2016           1
  mshr,mssec       =           0           0
  nsecdt (period)  =        3600
  axbtz            = UTC+1000
  xbtz             =  -10.0000000    
  mnper,nszout,mavgpd =        8784           1           1
  xorigkm,yorigkm,nssta =    505.985016       7075.88525               0
  ielmet,jelmet =          94          94
  delx,dely,nz =   5.00000007E-02   5.00000007E-02           1
  iastar,iastop,jastar,jastop =           1          94           1          94
  isastr,isastp,jsastr,jsastp =           1          94           1          94
  (computed) ngx,ngy  =          94          94
  meshdn              =           1
  ndrec,nctrec,LSGRID =          91           0 T
  
 Discrete Receptors (n,x,y,z,ht,group):
           1   508.709045       7078.10449       26.5000000       0.00000000               1
           2   508.723022       7078.09570       27.0000000       0.00000000               1
           3   508.742035       7078.10156       28.8999996       0.00000000               1
           4   508.730042       7078.06348       26.1000004       0.00000000               1
           5   508.690033       7078.15869       26.6000004       0.00000000               1
           6   508.712036       7078.15430       30.2000008       0.00000000               1
           7   508.734039       7078.15137       30.8999996       0.00000000               1
           8   508.780029       7078.09961       32.0000000       0.00000000               1
           9   508.773041       7078.09766       31.3999996       0.00000000               1
          10   508.766022       7078.09473       30.7999992       0.00000000               1
          11   508.763031       7078.08838       30.5000000       0.00000000               1
          12   508.755035       7078.08936       29.7000008       0.00000000               1
          13   508.749023       7078.09033       29.2000008       0.00000000               1
          14   508.752045       7078.08252       29.2999992       0.00000000               1
          15   508.755035       7078.07568       29.5000000       0.00000000               1
          16   508.758026       7078.06738       29.6000004       0.00000000               1
          17   508.760040       7078.05859       29.7000008       0.00000000               1
          18   508.753021       7078.05225       28.7000008       0.00000000               1
          19   508.749023       7078.04443       27.8999996       0.00000000               1
          20   508.752045       7078.03662       28.2999992       0.00000000               1
          21   508.744019       7078.03271       26.7999992       0.00000000               1
          22   508.740021       7078.04150       26.6000004       0.00000000               1
          23   508.732025       7078.04541       25.5000000       0.00000000               1
          24   508.725037       7078.04834       24.7000008       0.00000000               1
          25   508.719025       7078.05225       24.1000004       0.00000000               1
          26   508.715027       7078.05957       24.1000004       0.00000000               1
          27   508.711029       7078.07129       24.2999992       0.00000000               1
          28   508.713043       7078.06543       24.2000008       0.00000000               1
          29   508.780029       7078.09961       32.0000000       3.00000000               1
          30   508.773041       7078.09766       31.3999996       3.00000000               1
          31   508.766022       7078.09473       30.7999992       3.00000000               1
          32   508.763031       7078.08838       30.5000000       3.00000000               1
          33   508.755035       7078.08936       29.7000008       3.00000000               1
          34   508.749023       7078.09033       29.2000008       3.00000000               1
          35   508.752045       7078.08252       29.2999992       3.00000000               1
          36   508.755035       7078.07568       29.5000000       3.00000000               1
          37   508.758026       7078.06738       29.6000004       3.00000000               1
          38   508.760040       7078.05859       29.7000008       3.00000000               1
          39   508.753021       7078.05225       28.7000008       3.00000000               1
          40   508.749023       7078.04443       27.8999996       3.00000000               1
          41   508.752045       7078.03662       28.2999992       3.00000000               1
          42   508.744019       7078.03271       26.7999992       3.00000000               1
          43   508.740021       7078.04150       26.6000004       3.00000000               1
          44   508.732025       7078.04541       25.5000000       3.00000000               1
          45   508.725037       7078.04834       24.7000008       3.00000000               1
          46   508.719025       7078.05225       24.1000004       3.00000000               1
          47   508.715027       7078.05957       24.1000004       3.00000000               1
          48   508.711029       7078.07129       24.2999992       3.00000000               1
          49   508.713043       7078.06543       24.2000008       3.00000000               1
          50   508.780029       7078.09961       32.0000000       6.00000000               1
          51   508.773041       7078.09766       31.3999996       6.00000000               1
          52   508.766022       7078.09473       30.7999992       6.00000000               1
          53   508.763031       7078.08838       30.5000000       6.00000000               1
          54   508.755035       7078.08936       29.7000008       6.00000000               1
          55   508.749023       7078.09033       29.2000008       6.00000000               1
          56   508.752045       7078.08252       29.2999992       6.00000000               1
          57   508.755035       7078.07568       29.5000000       6.00000000               1
          58   508.758026       7078.06738       29.6000004       6.00000000               1
          59   508.760040       7078.05859       29.7000008       6.00000000               1
          60   508.753021       7078.05225       28.7000008       6.00000000               1
          61   508.749023       7078.04443       27.8999996       6.00000000               1
          62   508.752045       7078.03662       28.2999992       6.00000000               1
          63   508.744019       7078.03271       26.7999992       6.00000000               1
          64   508.740021       7078.04150       26.6000004       6.00000000               1
          65   508.732025       7078.04541       25.5000000       6.00000000               1
          66   508.725037       7078.04834       24.7000008       6.00000000               1
          67   508.719025       7078.05225       24.1000004       6.00000000               1
          68   508.715027       7078.05957       24.1000004       6.00000000               1
          69   508.711029       7078.07129       24.2999992       6.00000000               1
          70   508.713043       7078.06543       24.2000008       6.00000000               1
          71   508.780029       7078.09961       32.0000000       9.00000000               1
          72   508.773041       7078.09766       31.3999996       9.00000000               1
          73   508.766022       7078.09473       30.7999992       9.00000000               1
          74   508.763031       7078.08838       30.5000000       9.00000000               1
          75   508.755035       7078.08936       29.7000008       9.00000000               1
          76   508.749023       7078.09033       29.2000008       9.00000000               1
          77   508.752045       7078.08252       29.2999992       9.00000000               1
          78   508.755035       7078.07568       29.5000000       9.00000000               1
          79   508.758026       7078.06738       29.6000004       9.00000000               1
          80   508.760040       7078.05859       29.7000008       9.00000000               1
          81   508.753021       7078.05225       28.7000008       9.00000000               1
          82   508.749023       7078.04443       27.8999996       9.00000000               1
          83   508.752045       7078.03662       28.2999992       9.00000000               1
          84   508.744019       7078.03271       26.7999992       9.00000000               1
          85   508.740021       7078.04150       26.6000004       9.00000000               1
          86   508.732025       7078.04541       25.5000000       9.00000000               1
          87   508.725037       7078.04834       24.7000008       9.00000000               1
          88   508.719025       7078.05225       24.1000004       9.00000000               1
          89   508.715027       7078.05957       24.1000004       9.00000000               1
          90   508.711029       7078.07129       24.2999992       9.00000000               1
          91   508.713043       7078.06543       24.2000008       9.00000000               1
 Discrete Receptor Groups (group,name):
           1 DISCRETE

 Number of Sources by Type
 Control-file POINT Sources :            0
 EMARB-file POINT Sources   :            0
 Control-file AREA Sources  :           22
 EMARB-file AREA Sources    :            0
 Control-file LINE Sources  :            0
 EMARB-file LINE Sources    :            0
 Control-file VOLUME Sources:            4
 EMARB-file VOLUME Sources  :            0
 (boundary sources)         :            0
 Control-file FLARE Sources :            0
 EMARB-file FLARE Sources   :            0
 Control-file ROAD Sources  :            0
 EMARB-file ROAD Sources    :            0

  Source Names
 BR1C1           
 BR1C2           
 BR1C3           
 BR1C4           
 BR1C5           
 BR1C6           
 BR1C7           
 BR1C8           
 BR1C9           
 BR1C10          
 BR2C1           
 BR2C2           
 BR2C3           
 BR2C4           
 BR2C5           
 BR2C6           
 BR2C7           
 BR2C8           
 BR2C9           
 BR2C10          
 DIGEST          
 LIME            
 BIOF            
 CON_HOP         
 BELTDRY         
 HOP             




 **************    NOTICE    ***************
 NDRECP array reset to full range: all 1s

 **************    NOTICE    ***************
 Gridded receptor range reset to NGX by NGY


 ----------------------------------------------------------------------------------------------------------------------------------
          INPUT FILES

 Default Name     Unit No.     File Name and Path
 ------------     --------     ------------------
  CALPOST.INP         5        ConC_Disc.INP                                                                                                                       
    MODEL.DAT         4        E:\JOBS\NOO_17045\CALSUM\AMG_NEWPLAN\AMG_NEWPLAN_ALL.CON                                                                            


 ----------------------------------------------------------------------------------------------------------------------------------
          OUTPUT FILES

 Default Name     Unit No.     File Name and Path
 ------------     --------     ------------------
  CALPOST.LST         8        E:\JOBS\NOO_17045\CALPOST\AMG_NEWPLAN\C_DISC.LST                                                                                    
  (TSERIES 1)        21        E:\JOBS\NOO_17045\CALPOST\AMG_NEWPLAN\TSERIES_SPECIES_ttHR_CONC_ALL.DAT                                                             
 (TSERIES 24)        23        E:\JOBS\NOO_17045\CALPOST\AMG_NEWPLAN\TSERIES_SPECIES_ttHR_CONC_ALL.DAT                                                             
  
**********************************************************************************************************************************
                                              CALPOST  Version 7.1.0         Level 141010      
**********************************************************************************************************************************
  
  
                           ODOUR         1

             TOP-50    1   HOUR AVERAGE  CONCENTRATION VALUES  (Odour Units)

 (Data are processed only in Hours: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24)
    STARTING YEAR  DAY TIME(HHMM) RECEPTOR  TYPE   CONCENTRATION   COORDINATES (km)

             2016   90    2100    (  0,   6)  D     7.5509E+00     508.712  7078.154
             2016   90    2100    (  0,   5)  D     7.4092E+00     508.690  7078.159
             2016  292    2100    (  0,   5)  D     6.9118E+00     508.690  7078.159
             2016  122    2200    (  0,   6)  D     6.8162E+00     508.712  7078.154
             2016  364    2200    (  0,   7)  D     6.7579E+00     508.734  7078.151
             2016  206    2000    (  0,   6)  D     6.6612E+00     508.712  7078.154
             2016   90    2100    (  0,   7)  D     6.6113E+00     508.734  7078.151
             2016  364    2200    (  0,   6)  D     6.6000E+00     508.712  7078.154
             2016  319    1900    (  0,   6)  D     6.5203E+00     508.712  7078.154
             2016   24    0400    (  0,   7)  D     6.4780E+00     508.734  7078.151
             2016  122    2200    (  0,   7)  D     6.4059E+00     508.734  7078.151
             2016  206    2000    (  0,   7)  D     6.3693E+00     508.734  7078.151
             2016  319    1900    (  0,   7)  D     6.2979E+00     508.734  7078.151
             2016   24    0300    (  0,   6)  D     6.2507E+00     508.712  7078.154
             2016  331    2100    (  0,   6)  D     6.2359E+00     508.712  7078.154
             2016   49    0000    (  0,   7)  D     6.1663E+00     508.734  7078.151
             2016   90    2100    (  0,   1)  D     6.0852E+00     508.709  7078.104
             2016  334    0300    (  0,   5)  D     6.0733E+00     508.690  7078.159
             2016  122    2200    (  0,   5)  D     6.0165E+00     508.690  7078.159
             2016  257    0200    (  0,   5)  D     5.9289E+00     508.690  7078.159
             2016   90    2000    (  0,   5)  D     5.8960E+00     508.690  7078.159
             2016  319    1900    (  0,   5)  D     5.8851E+00     508.690  7078.159
             2016   28    0100    (  0,   5)  D     5.8496E+00     508.690  7078.159
             2016  193    1800    (  0,   5)  D     5.8386E+00     508.690  7078.159
             2016  101    2000    (  0,   5)  D     5.8118E+00     508.690  7078.159
             2016  201    1800    (  0,   5)  D     5.7977E+00     508.690  7078.159
             2016  206    2000    (  0,   5)  D     5.7924E+00     508.690  7078.159
             2016  257    0500    (  0,   5)  D     5.7487E+00     508.690  7078.159
             2016  292    2100    (  0,   6)  D     5.7174E+00     508.712  7078.154
             2016   12    2300    (  0,   7)  D     5.7089E+00     508.734  7078.151
             2016  309    0400    (  0,   6)  D     5.6759E+00     508.712  7078.154
             2016  262    0500    (  0,   5)  D     5.6597E+00     508.690  7078.159
             2016  331    2100    (  0,   5)  D     5.6246E+00     508.690  7078.159
             2016  292    2300    (  0,   7)  D     5.6104E+00     508.734  7078.151
             2016  122    2200    (  0,   1)  D     5.6093E+00     508.709  7078.104
             2016   24    0300    (  0,   7)  D     5.6045E+00     508.734  7078.151
             2016   24    0300    (  0,   5)  D     5.5297E+00     508.690  7078.159
             2016   24    0400    (  0,   3)  D     5.5295E+00     508.742  7078.102
             2016  265    0500    (  0,   6)  D     5.5245E+00     508.712  7078.154
             2016   90    2100    (  0,   2)  D     5.5132E+00     508.723  7078.096
             2016   34    2000    (  0,   6)  D     5.5081E+00     508.712  7078.154
             2016  233    0200    (  0,   5)  D     5.4874E+00     508.690  7078.159
             2016   14    2300    (  0,   6)  D     5.4651E+00     508.712  7078.154
             2016   24    0400    (  0,   6)  D     5.4600E+00     508.712  7078.154
             2016  319    1900    (  0,   1)  D     5.3968E+00     508.709  7078.104
             2016  364    2200    (  0,   5)  D     5.3963E+00     508.690  7078.159
             2016   24    0000    (  0,   7)  D     5.3882E+00     508.734  7078.151
             2016  364    2200    (  0,   2)  D     5.3761E+00     508.723  7078.096
             2016  364    2200    (  0,   1)  D     5.3720E+00     508.709  7078.104
             2016  206    2000    (  0,   1)  D     5.3654E+00     508.709  7078.104
  
**********************************************************************************************************************************
                                              CALPOST  Version 7.1.0         Level 141010      
**********************************************************************************************************************************
  
  
                           ODOUR         1

             TOP-50   24   HOUR AVERAGE  CONCENTRATION VALUES  (Odour Units)

 (Data are processed only in Hours: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24)
    STARTING YEAR  DAY TIME(HHMM) RECEPTOR  TYPE   CONCENTRATION   COORDINATES (km)

             2016  257    0000    (  0,   5)  D     1.0446E+00     508.690  7078.159
             2016   90    0000    (  0,   5)  D     9.1866E-01     508.690  7078.159
             2016  257    0000    (  0,   6)  D     8.7618E-01     508.712  7078.154
             2016   24    0000    (  0,   7)  D     8.5548E-01     508.734  7078.151
             2016   90    0000    (  0,   6)  D     8.2259E-01     508.712  7078.154
             2016   28    0000    (  0,   5)  D     8.1358E-01     508.690  7078.159
             2016  336    0000    (  0,   6)  D     7.8055E-01     508.712  7078.154
             2016  265    0000    (  0,   6)  D     7.3923E-01     508.712  7078.154
             2016   24    0000    (  0,   6)  D     7.3740E-01     508.712  7078.154
             2016  257    0000    (  0,   7)  D     7.1054E-01     508.734  7078.151
             2016   24    0000    (  0,   3)  D     7.0546E-01     508.742  7078.102
             2016  265    0000    (  0,   5)  D     7.0066E-01     508.690  7078.159
             2016  336    0000    (  0,   5)  D     6.9459E-01     508.690  7078.159
             2016  292    0000    (  0,   5)  D     6.9380E-01     508.690  7078.159
             2016  336    0000    (  0,   7)  D     6.8952E-01     508.734  7078.151
             2016   34    0000    (  0,   7)  D     6.8244E-01     508.734  7078.151
             2016   24    0000    (  0,  13)  D     6.7740E-01     508.749  7078.090
             2016   24    0000    (  0,  12)  D     6.7180E-01     508.755  7078.089
             2016   24    0000    (  0,  10)  D     6.7073E-01     508.766  7078.095
             2016  334    0000    (  0,   5)  D     6.6828E-01     508.690  7078.159
             2016   24    0000    (  0,   9)  D     6.6326E-01     508.773  7078.098
             2016   90    0000    (  0,   7)  D     6.6225E-01     508.734  7078.151
             2016   24    0000    (  0,  11)  D     6.5952E-01     508.763  7078.088
             2016   24    0000    (  0,  14)  D     6.5602E-01     508.752  7078.083
             2016   24    0000    (  0,   8)  D     6.5037E-01     508.780  7078.100
             2016   24    0000    (  0,   2)  D     6.4813E-01     508.723  7078.096
             2016  257    0000    (  0,   1)  D     6.4536E-01     508.709  7078.104
             2016   24    0000    (  0,  34)  D     6.4373E-01     508.749  7078.090
             2016   24    0000    (  0,  33)  D     6.3869E-01     508.755  7078.089
             2016   24    0000    (  0,  31)  D     6.3764E-01     508.766  7078.095
             2016   24    0000    (  0,  15)  D     6.3688E-01     508.755  7078.076
             2016  215    0000    (  0,   7)  D     6.3137E-01     508.734  7078.151
             2016   24    0000    (  0,  30)  D     6.3064E-01     508.773  7078.098
             2016   90    0000    (  0,   1)  D     6.3007E-01     508.709  7078.104
             2016   24    0000    (  0,  32)  D     6.2738E-01     508.763  7078.088
             2016   24    0000    (  0,  35)  D     6.2417E-01     508.752  7078.083
             2016   49    0000    (  0,   5)  D     6.2223E-01     508.690  7078.159
             2016   24    0000    (  0,  29)  D     6.1860E-01     508.780  7078.100
             2016   24    0000    (  0,  16)  D     6.1426E-01     508.758  7078.067
             2016  265    0000    (  0,   7)  D     6.1289E-01     508.734  7078.151
             2016   24    0000    (  0,  36)  D     6.0658E-01     508.755  7078.076
             2016   24    0000    (  0,   1)  D     6.0326E-01     508.709  7078.104
             2016  245    0000    (  0,   6)  D     6.0314E-01     508.712  7078.154
             2016   34    0000    (  0,   6)  D     5.9878E-01     508.712  7078.154
             2016  336    0000    (  0,   1)  D     5.9670E-01     508.709  7078.104
             2016   24    0000    (  0,   4)  D     5.9382E-01     508.730  7078.063
             2016   24    0000    (  0,  17)  D     5.9288E-01     508.760  7078.059
             2016   24    0000    (  0,  18)  D     5.8620E-01     508.753  7078.052
             2016   24    0000    (  0,  37)  D     5.8572E-01     508.758  7078.067
             2016  233    0000    (  0,   5)  D     5.8548E-01     508.690  7078.159
  
**********************************************************************************************************************************
                                              CALPOST  Version 7.1.0         Level 141010      
**********************************************************************************************************************************
  
  
                           ODOUR         1

             TOP-50 8784   HOUR AVERAGE  CONCENTRATION VALUES  (Odour Units)

 (Data are processed only in Hours: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24)
    STARTING YEAR  DAY TIME(HHMM) RECEPTOR  TYPE   CONCENTRATION   COORDINATES (km)

             2016    1    0000    (  0,   5)  D     9.5757E-02     508.690  7078.159
             2016    1    0000    (  0,   6)  D     8.8162E-02     508.712  7078.154
             2016    1    0000    (  0,   7)  D     7.8695E-02     508.734  7078.151
             2016    1    0000    (  0,   1)  D     6.5469E-02     508.709  7078.104
             2016    1    0000    (  0,   2)  D     5.9064E-02     508.723  7078.096
             2016    1    0000    (  0,   3)  D     5.6846E-02     508.742  7078.102
             2016    1    0000    (  0,  27)  D     5.2741E-02     508.711  7078.071
             2016    1    0000    (  0,  13)  D     5.2184E-02     508.749  7078.090
             2016    1    0000    (  0,  48)  D     5.1133E-02     508.711  7078.071
             2016    1    0000    (  0,  12)  D     5.0947E-02     508.755  7078.089
             2016    1    0000    (  
Log in to download the original file

C_DISC.LST · 229 KB (small file)

The supporting record

Open full page ↗

Source document

Analyse documents ↗Open full page ↗

My Comparisons

Choose two to four records of the same kind. Drag using a handle or use the “Compare” buttons.

Your selected records are saved in this browser for your account. Results use the filters on the page where you choose “Compare selected”.