3983ReconfigReport · REC15/0023

Specific Outcomes Solutions
appropriate to that function;

b) _ provides a high level of internal
accessibility both within the site and to
external sites and appropriate external
connections for vehicles, pedestrian and
cycle movements;

c) deters through-traffic from residential areas
and creates safe conditions for local road
users, pedestrians and cyclists;

d) incorporates street junctions and access to
lots that are located and spaced to facilitate
safe and convenient vehicle movements;

e) provides for street widths and lengths that
optimise the cost effectiveness of the
network and the provision of public utilities;

f) provides for road reserve widths not less
than the minimum identified Section 2.3 of
PSP5 Engineering Design Standards —
Roads, Drainage and Earthworks;

g) minimises the extent of earthworks
required by being sympathetic to the
terrain;

h) has no significant adverse effects on
habitat corridors or areas of significant
native vegetation;

i) does not create noise attenuation
difficulties;

j) incorporates pedestrian and cyclist
crossings at intersections or where
required to access high activity nodes and
public transport;

k) has regard to the potential for conflict
between vehicles, pedestrians and cyclists;

 

and
l) incorporates on-road cycling facilities.
O9 The development contains a pathway The scale of the development does not
system that encourages walking and cycling and | require the provision of additional
provides a safe environment for users, and is-- pathways.

a) a stable, smooth surface, including across
driveways, sections and joins;

b) easily maintained;

c) of a width and longitudinal gradient to cater
for projected usage

d) inclusive of clear sight-lines for safe use;

e) be free of any obstructions such as
fences, signage and bollards.

 

010 The subdivision layout is designed to The existing linkages to adjoining site will
facilitate linkages with adjoining sites in the remain following the Reconfiguration.
immediate area.
O11 Where the lots are to be used for Industrial | Not applicable.
business or Commercial business uses, the
layout provides for appropriate buffer areas, to
mitigate possible impacts on nearby residences
or other noise sensitive uses.

012 For lots in the Rural Settlement Zone—a Not applicable.
sealed access to the nearest urban settlement is
available.