Council archive · source document
Part 5 of 37 Appendix 3 - Civil Engineer Report MCU12/0208
Very large file (37.5 MB): the whole original can take several minutes to open, especially on a phone. Text is quick to read.
Original PDF page 14, section 1. The text section number identifies this passage in the reader.
Engineering Report
Noosa on Weyba
> An improved flood access for neighbouring properties is possible.
For further details refer to the Flood Study prepared by Cardno dated 23rd October 2012.
4.2.1 Minimum Floor Levels I Filling
Cardno Sketch SK301 indicates the pre and post development 100 year ARI inundation levels as determined
by the flood modelling.
The development west of Walter Hay Drive is predominantly outside of the 100 year ARI inundation extent.
Minor sections of filling are required within Precinct I. The 100 year ARI developed case peak flood level is
3.45 mAHD in this area. Therefore the minimum floor levels will be set above 3.95 mAHD to provide
sufficient flood immunity in accordance with SCRC requirements.
Filling is required within the Precinct F and G to ensure that sufficient flood imm unity is provided. A
waterway corridor of a minimum 120 metre width will be maintained in this area. The 100 year ARI
developed case peak flood level is 2.90 mAHD in these areas. Therefore the minimum floor levels will be set
above 3.40 mAHD to provide sufficient flood immunity in accordance with SCRC requirements. The entire
area will be filled to levels above the 100 year ARI flood level (with climate change).
The proposed filling within the site will reduce available flood storage, although compared to the available
storage in Lake Weyba and the surrounding floodplain, the reduction is minimal. Flood modelling has shown
that the impact of the reduced flood storage is contained within the site.
4.2.2 Culvert Crossing
The development proposes a number of culvert crossings to provide road access, flood immunity and
stormwater detention. Cardno Sketch 300 and 302 provides indicative locations and sizing for the proposed
culvert crossings.
Where roads have been located between the Noosa Wildlife Refuge and the environmental protection, the
minim um culvert height has been set at 1200mm, with a width of 2700mm,to allow for the safe passage of
koalas and other animals.
The Department of Main Roads Fauna Sensitive Road Design (2000) indicates that culverts of this
height are recommended to allow for passage of small, medium and large mammals and semi-
arboreal mammals (which includes koalas).
The culverts have been sized to these dimensions to specifically allow the movement of fauna between
these areas.
November 2012 Cardno 13
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Part 5 of 37 Appendix 3 - Civil Engineer Report MCU12/0208Related documentApplication case desk ↗
About this file
- File size
- 37.5 MB (very large file)
- File type
No other editions are linked here.
Original file
Log in to download the original file
The download may take a few minutes. On mobile data, it is best to wait for Wi-Fi.