Original source · versioned page text
Reference Documents - MCU23-0142
Original PDF page 50, section 1. The text section number identifies this passage in the reader.
Compliance/
Item Requirement
Comment
5. Minimum Service Levels – Table SC6.10.5.1 indicates minimum service levels for uses. Council Complies – 1 Service
may seek to vary the requirements having regard to the size, location and level of occupancy of per week for
the use. residential units. 4
services maximum
per week proposed
for commercial
tenancy.
6. Specialised Waste Storage Bins – SC6.10 - Appendix 2 describes two types of specialised waste
Council 1100L bins
storage bins available through Council’s contractor.
proposed.
7. Size and location of Waste Storage Areas –
a) The following matters will be considered in determining an appropriate size for waste
storage areas:
1. Types of waste and storage required:
• bins for putrescible waste;
• bins for recyclables;
• drums for waste cooking oils;
• bales for cardboard;
• bags or bins for green waste; and
• any other specialised waste storage bins needed, eg: medical waste; and Complies –
2. Sufficient space between waste storage bins to allow for manoeuvring and
washing of bins, where appropriate noting that the bin store must be large Details throughout
enough for the bins to sit next to each other, not behind each other. OWMP
b) Adequate lighting needs to be provided to allow the usage of the bin store after dark
c) Internal waste rooms should be well ventilated and have a smooth easily cleanable floor
d) Suitable drainage, with water discharging into a sewer drain, must be installed to allow
the washing of bins and a tap with hose connection available.
e) Waste storage areas can be roofed or unroofed.
f) Waste storage areas contain bunded and non-bunded areas depending on their size and
the type of waste to be stored. Where bunded areas are required:
1. waste oil containers must be stored within bunded areas; and
2. bins must be washed within the bunded area.
8. Screening of Waste Storage Areas - Waste storage areas are required to be screened and can be Complies – All refuse
attractively designed to minimise their visual impact on the streetscape and surrounding areas. storage is provided
Examples exist within our shire of such storage areas. within enclosures.
9. Indoor Waste Storage –
a) Waste and waste storage bins must not be placed:
1. where they may impede safe use of any exit, exit corridor, doorway or stairway;
2. under stairways; or Complies –
3. near any existing or potential heat source.
b) Waste storage bins must be made of non-combustible materials. See Section 2.4 for
c) Indoor waste storage areas must: details
1. be well ventilated;
2. be well lit; and
3. have “hazardous waste” and “no smoking” signs installed.
Site: 23 – 25 Sidoni Street, Tewantin 6
Reference: 23BRW0171
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original (Reference Documents - MCU23-0142.pdf)
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.