Reference Documents - MCU23-0142

                                                                                                               Compliance/
 Item     Requirement
                                                                                                               Comment
 10.      Design Standards for Vehicle Access – Within the development site:                                   N/A – Kerbside
          a) design specifications must be sufficient to carry a wheel load of 7 tonnes per axle; and          collection proposed.
          b) turning circles are designed in accordance with AUSTROADS: design single unit truck/bus
               (12.5 metres) template; and
          c) vehicles must be able to move in a forward direction at all times or be able to enter and exit
               the development in a forward direction; or
          d) a turning bowl or a “T” or “Y” shaped manoeuvring area is provided, which allows the vehicle
               to turn with no more than a three point turn; and
          e) for bin collection from within a building or structure:
                    1. height clearance must be sufficient to allow for safe travel and lifting for vehicles
                         and bins); and
                    2. the grade of access/egress ramps must not exceed 1:8.
 11.      Specialised Equipment and Facilities –                                                               N/A – Standard
          a) Council may require or accept specialised equipment in some circumstances, including:             disposal and
                    1. refuse chutes where the building is 3 storeys or greater; and                           collection methods
                    2. compaction equipment to minimise storage area.                                          proposed.
          b) Compaction equipment may be accepted for the following wastes:
                    1. mixed waste (other than glass);
                    2. cardboard or paper;
                    3. plastic or aluminium containers; and
                    4. putrescible waste - provided a specialised refrigerated compactor is used.
          c) Plans for the installation of compactors must be submitted for the approval of Council’s
               Waste Management Officer.




Site: 23 – 25 Sidoni Street, Tewantin                                                                                            7
Reference: 23BRW0171