Original source · versioned page text
2019-12-11 SM Agenda - Item 1 - Attachment 2 - Final New Noosa Plan Part 1-3 and 5-6 Track Change version
Plans and drawings
This document appears to be plans or drawings. Its page text below holds only the words printed on the drawings, without the drawings themselves, so it may be jumbled or hard to follow. To see the plans as drawn, choose Original above or download the file (both need you to log in).
Log in to see the plans as drawn Performance outcomes Acceptable Outcomes
Front fences and walls
PO11PO12 AO11AO12.1
Front fences and walls are designed and sited to: Front fences or walls are set back an average of 1 metre and
(a) contribute to the attractiveness of the streetscape; are articulated to provide visual interest by stepping the design
at a maximum of 5 metre intervals.
(b) be compatible with the existing streetscape character;
(c) avoid interference with movement of surface stormwater; AO11AO12.2
(d) allow for casual surveillance of the street; Where located on the boundary:
(e) provide planting in front of solid fences and walls; and (a) the solid portion of front fences and walls is no more
than 1.2 metres high; or
(f) ensure plantings between the front fence and the
footpath does not create an impediment for pedestrians (b) the walls contain openings or materials that ensure it is
using the footpath. 50% transparent and has a height not exceeding 1.8
metres.
AO11AO12.3
Solid front fences and walls may be 1.8 metres in height if the
property has frontage to an arterial road or a distributor road.
AO11AO12.4
The area of land between the front fence and the boundary is
landscaped to screen the fence from the street, however,
landscaping does not encroach more than 500 millimetres into
the road reserve or within 1.5 metres of a sealed footpath.
Editor's note—refer to figure AP34A and figure AP34B
Materials and finishes
PO12PO13 AO12AO13
Development incorporates: Buildings and structures use: Buildings and structures use:
(a) materials and finishes that complement the surrounding (a) natural finishes wherever possible;
area and integrate with the surrounding natural and built (b) a mix of lightweight and textured external finishes;
environment; and
(c) masonry construction where variation is provided in
(b) a variety of external finishes to provide an interesting built texture and the façade uses a variety of finishes to break
form and avoid bulky single plane finishes. up the surface; and
(d) open or transparent balustrades.
Editor's note—refer to Figure AP33B
Roof form
PO13PO14 AO13AO14.1
Roof forms: With the exception of Noosa Heads and Coastal Communities
(a) contribute positively to the local skyline; Local Areas, the main roof of the building has a roof pitch no
less than 5 degrees and has minimum 600 millimetre eaves to
(b) complement the character of the locality and the
at least 75% of the perimeter of the building.
topography of the site;
(c) avoid box profiles/parapets; and AO13AO14.2
(d) do not create opportunities for overlooking the private Development does not include roof top terraces.
open space or internal spaces of neighbourhood
properties. AO14.3
The total width of any parapet wall does not exceed 50% of the
width of the front facarde of a building.
Table 6.3.3.3 Criteria for assessment (part)
Performance outcomes Acceptable Outcomes
Safety and amenity
PO14PO15 AO14AO15.1
**FINAL DRAFT Post Consultation 2019** Page 6 of 10
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalLog in to download the original file
Large file: the download may take up to a minute.
Searchable page text hides email addresses. Original files are unchanged and may show email addresses.