Council archive · source document
Appendix A - Code Assessment · MCU22/0207
1. ensure that unacceptable risks to 2. the boat lifting device is no greater
personal and public safety are than 4 metres in width or for a jetty
unlikely to be caused; hoist, 2 metres in width;
2. avoid cluttering of the waterway; 3. the boat lifting device is located
3. ensure that visual amenity of the adjacent the walkway to the jetty
foreshore and waterway is and is generally perpendicular to the
maintained including— revetment wall;
4. the highest part of the boat lifting
1. avoiding bulky or large device is no higher than the top of
structures; and the revetment wall under normal
2. minimising structures canal water level conditions;
above the water level; 5. the boat lifting device is not located
3. ensure the structural on the jetty head; and
integrity of the works is 6. the outermost projection of any
maintained and not boatlifting device is setback a
compromised; and minimum of 1 metre from the
4. avoid a secondary boat prolongation of the boundaries.
lifting device (floating AO21.2 Not applicable
dock) that exceeds Only one primary boat lifting device and one Development is not within the Noosa Waters
8m². secondary small device (floating dock) per jetty. Estate waterways.
The small secondary floating dock is no greater
than 8m² and purpose designed for personal
watercraft such as jet skis, kayaks, paddleboards
etc.
AO21.3 Not applicable
A shared jetty contains only one boat lifting device Development is not within the Noosa Waters
on either side of the jetty. Estate waterways.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Appendix A - Code Assessment.pdfRelated documentApplication case desk ↗
About this file
- File size
- 453 KB (small file)
- File type
No other editions are linked here.