Council archive · source document
Appendix A - Code Assessment · MCU22/0207
AO21.4 Not applicable
The structure may be securely attached, excluding Development is not within the Noosa Waters
roped, chains and straps, to an existing jetty where Estate waterways.
a structural engineer's report for the design is
provided certifying that the jetty is structurally
capable of supporting the boat lifting device
(Refer to Figures 9.4.9.3H – 9.4.9.3J for examples
of boat lifting devices).
AO21.5 Not applicable
For twin jetty structures with central boat lifting Development is not within the Noosa Waters
devices- Estate waterways.
1. are only permitted in the absence of
any jetties;
2. the structure does not exceed 10
metres in length;
3. the structure does not exceed 7
metres in width; and
4. each jetty is a maximum of 1.5 metre
wide.
Editor's Note - Refer to Figures below.
Figure 9.4.9.3H - Boat Lifting Devices - Cable &
Winch
Figure 9.4.9.3J - Alternative Boat Lifting Device -
Twin Jetty
Figure 9.4.9.3K - Pneumatic Float (Platform)
Figure 9.4.9.3L - Floating Pontoon
Fixed Floating Structures & Boat Ramps within Noosa Waters Estate waterways
PO22 No acceptable outcome provided Not applicable
Fixed floating structures whether or not attached Development is not within the Noosa Waters
to land (e.g. pontoons and any associated Estate waterways.
See the original
The page text is free to read. Viewing or downloading an original file needs an account.
Log in to see the originalUsed in these records
Appendix A - Code Assessment.pdfRelated documentApplication case desk ↗
About this file
- File size
- 453 KB (small file)
- File type
No other editions are linked here.